알루미늄 합금 6061에서 와이어 진동부가에 의한 와이어 컷 방전가공에 따른 표면 거칠기 특성(Ⅱ)Characteristics of Surface Roughness According to Wire Vibration Wire-cut Electric Discharge Machining of Aluminum Alloy 6061(II)
- Other Titles
- Characteristics of Surface Roughness According to Wire Vibration Wire-cut Electric Discharge Machining of Aluminum Alloy 6061(II)
- Authors
- 류청원; 최성대
- Issue Date
- 2015
- Publisher
- 한국기계가공학회
- Keywords
- Aluminium Alloy 6061(알루미늄 합금 6061); Wire-cut E.D.M.(와이어 컷 방전가공); Vibration(진동); Horizontality(수평방향); Surface Roughness(표면 거칠기)
- Citation
- 한국기계가공학회지, v.14, no.4, pp 100 - 107
- Pages
- 8
- Journal Title
- 한국기계가공학회지
- Volume
- 14
- Number
- 4
- Start Page
- 100
- End Page
- 107
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23407
- DOI
- 10.14775/ksmpe.2015.14.4.100
- ISSN
- 1598-6721
2288-0771
- Abstract
- Recently, high-efficiency machining in the production of high-value products with a complex shape has constantly been required with the need for hybrid machining. In this study, in addition to the wire-cut E.D.M.
and vibration used to present the possibility of a hybrid process by carrying out the aluminum alloy experiment, the hybrid process determines the nature of the surface. The selected experimental parameters are horizontality, waveform, amplitude, peak current, and frequency. The experimental results give guidelines for selecting reasonable machining parameters. The surface roughness was improved by about 20% with increases in the amplitude of the vibration.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - School of Mechanical System Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.