마이크로 3차원 입체형상부품 제조기술 연구
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 제태진 | - |
dc.contributor.author | 최두선 | - |
dc.contributor.author | 황경현 | - |
dc.contributor.author | 신보성 | - |
dc.contributor.author | 이응숙 | - |
dc.contributor.author | 이종찬 | - |
dc.date.accessioned | 2023-12-11T14:00:29Z | - |
dc.date.available | 2023-12-11T14:00:29Z | - |
dc.date.issued | 2006 | - |
dc.identifier.issn | 1225-696X | - |
dc.identifier.issn | 2287-6359 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23896 | - |
dc.description.abstract | Demands for micro parts have increased with recent advances in IT and machinery industries. However, the present technology leaves much to be desired to effectively produce parts with the volume of 1mm and less by mechanical method in large quantities. This paper provides a method for efficient quantity production of complete micro 3D structure using micro end-milling cutting process. The possibility has proven via manufacturing experiment of a multistage micro complex gear structure of 500m in length, 500m in maximum external diameter and a volume of 1mm³ and less. | - |
dc.format.extent | 6 | - |
dc.publisher | 한국소성가공학회 | - |
dc.title | 마이크로 3차원 입체형상부품 제조기술 연구 | - |
dc.title.alternative | A Study on Micro Manufacturing Technology for 3-Dimensional Micro Parts | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.bibliographicCitation | 소성가공, v.15, no.9, pp 673 - 678 | - |
dc.citation.title | 소성가공 | - |
dc.citation.volume | 15 | - |
dc.citation.number | 9 | - |
dc.citation.startPage | 673 | - |
dc.citation.endPage | 678 | - |
dc.identifier.kciid | ART001042016 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | 3-Dimensional Micro Parts | - |
dc.subject.keywordAuthor | Micro End-Mill | - |
dc.subject.keywordAuthor | Micro Gear Structure | - |
dc.subject.keywordAuthor | Manufacturing Process | - |
dc.subject.keywordAuthor | 3-Dimensional Micro Parts | - |
dc.subject.keywordAuthor | Micro End-Mill | - |
dc.subject.keywordAuthor | Micro Gear Structure | - |
dc.subject.keywordAuthor | Manufacturing Process | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.