고경도 금형강의 CBN 볼 엔드밀 가공에서 가공성 평가
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김홍규 | - |
dc.contributor.author | 심재형 | - |
dc.contributor.author | 이종찬 | - |
dc.date.accessioned | 2023-12-11T14:00:30Z | - |
dc.date.available | 2023-12-11T14:00:30Z | - |
dc.date.issued | 2007 | - |
dc.identifier.issn | 2508-5093 | - |
dc.identifier.issn | 2508-5107 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23900 | - |
dc.description.abstract | Generally, the machinability of materials that have a good mechanical properties is poor. The material having a high strength, high toughness in high temperature and wear resistance, it is difficult to remove a chip from workpiece. STD11 and NAK80 are kinds of these materials and these materials can be used in many industrial fields. But it is limited in use because of high cost and poor machinability. In this experimental study, the cutting of STD11 and NAK80 were used to decide the machinability and the tool shape of CBN ball end mill. From the results, the CBN ball end mill is verified that the estimated cutting edge shape of rake angle 30 degree has consistent effect on the tool wear and cutting force. | - |
dc.format.extent | 8 | - |
dc.publisher | 한국생산제조학회 | - |
dc.title | 고경도 금형강의 CBN 볼 엔드밀 가공에서 가공성 평가 | - |
dc.title.alternative | Machinability Evaluation of CBN Ball End Milling in Die & Mold Steels with High Hardness | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.bibliographicCitation | 한국생산제조학회지, v.16, no.4, pp 119 - 126 | - |
dc.citation.title | 한국생산제조학회지 | - |
dc.citation.volume | 16 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 119 | - |
dc.citation.endPage | 126 | - |
dc.identifier.kciid | ART001083663 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | CBN(Cubic Boron Nitride | - |
dc.subject.keywordAuthor | 입방질화붕소) | - |
dc.subject.keywordAuthor | Ball end mill(볼 엔드밀) | - |
dc.subject.keywordAuthor | Die & Mold materials(금형강 재료) | - |
dc.subject.keywordAuthor | Rake angle(경사각) | - |
dc.subject.keywordAuthor | Machinability evaluation(가공성 평가) | - |
dc.subject.keywordAuthor | CBN(Cubic Boron Nitride | - |
dc.subject.keywordAuthor | 입방질화붕소) | - |
dc.subject.keywordAuthor | Ball end mill(볼 엔드밀) | - |
dc.subject.keywordAuthor | Die & Mold materials(금형강 재료) | - |
dc.subject.keywordAuthor | Rake angle(경사각) | - |
dc.subject.keywordAuthor | Machinability evaluation(가공성 평가) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.