재료 융합 단계와 임시 스트럿의 경계조건을 이용한 기둥-보 강결 구조물의 효율적인 거동 연구
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 조재형 | - |
dc.contributor.author | 송재호 | - |
dc.date.accessioned | 2023-12-11T18:00:27Z | - |
dc.date.available | 2023-12-11T18:00:27Z | - |
dc.date.issued | 2020-02 | - |
dc.identifier.issn | 1226-833x | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/25475 | - |
dc.description.abstract | Recently, small and medium-sized rahmen-type bridges have been developed as a technology that ensures the stability of structural behavior and the safety of use at the same time by using efficient and economical materials that make up the convergence section of reinforced bar, structural steel and concrete. This study is about a rahmen-type structure applied with the installation and dismantling of the strut. It improves the serviceability of the structure by forming multi-points and efficiently applies the convergence section of structural steel and concrete materials to the structural system changes to induce the displacement improvement effect additionally. By constructing mock-up models for the beam-column joint, the displacement was calculated and compared, and this was compared and analyzed by numerical analysis. The final displacement showed an improvement effect of 13.46% to 36.28% based on the vertical displacement of the existing structure without struts through the experiment of the mock-up models. As a result of analysis by numerical analysis method, the displacement improvement effect of 42.89% could be derived. | - |
dc.format.extent | 14 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국산업융합학회 | - |
dc.title | 재료 융합 단계와 임시 스트럿의 경계조건을 이용한 기둥-보 강결 구조물의 효율적인 거동 연구 | - |
dc.title.alternative | A Study for Efficient Behavior of Beam-column Joint Structure Using Material Convergence Section Stage and a Temporary Boundary Condition by Strut | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.doi | 10.21289/KSIC.2020.23.2.361 | - |
dc.identifier.bibliographicCitation | 한국산업융합학회논문집, v.23, no.2, pp 361 - 374 | - |
dc.citation.title | 한국산업융합학회논문집 | - |
dc.citation.volume | 23 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 361 | - |
dc.citation.endPage | 374 | - |
dc.identifier.kciid | ART002580924 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | convergence section | - |
dc.subject.keywordAuthor | strut | - |
dc.subject.keywordAuthor | multi-point boundary conditions | - |
dc.subject.keywordAuthor | beam-column joint | - |
dc.subject.keywordAuthor | mock-up test | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.