Comparison of the properties of poly(butylene terephthalate) nanocomposite fibers with different organoclays
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Jeong-Cheol | - |
dc.contributor.author | Chang, Jin-Hae | - |
dc.date.accessioned | 2024-02-27T13:02:41Z | - |
dc.date.available | 2024-02-27T13:02:41Z | - |
dc.date.issued | 2007-08 | - |
dc.identifier.issn | 1598-5032 | - |
dc.identifier.issn | 2092-7673 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/27222 | - |
dc.description.abstract | The aims of this study were to investigate the intercalation of polymer chains with organoclays and improve the thermo-mechanical properties of poly(butylene terephthalate) (PBT) hybrids by comparing PBT hybrids synthesized using two different organoclays. The organoclays; dodecyltriplieiiylphosphonium-montmorillonite (C12PPh-MMT) and dodecyltriphenyiphosphonium-mica (C12PPh-Mica), were used to fabricate the PBT hybrid fibers. Variations in the properties of the hybrid fibers with the organoclays within the polymer matrix, as well as the draw ratio (DR), are discussed. The thermo-mechanical properties and morphologies of the PBT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffraction, electron microscopy and mechanical tensile properties analysis. The nanostructures of the hybrid fibers were determined using both scanning and transmission electron microscopies, which showed some of the clay layers to be well dispersed within the matrix polymer, although some clustered or agglomerated particles were also detected. The thermal properties of the hybrid fibers were found to be better than those of the pure PBT fibers at a DR = 1. The tensile mechanical properties of the C12PPh-MMT hybrid fibers were found to worsen with increasing DR. However, the initial moduli of the C12PPh-Mica hybrid fibers were found to slightly increase on increasing the DR from I to 18. | - |
dc.format.extent | 10 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | POLYMER SOC KOREA | - |
dc.title | Comparison of the properties of poly(butylene terephthalate) nanocomposite fibers with different organoclays | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.doi | 10.1007/BF03218813 | - |
dc.identifier.wosid | 000249284600010 | - |
dc.identifier.bibliographicCitation | MACROMOLECULAR RESEARCH, v.15, no.5, pp 449 - 458 | - |
dc.citation.title | MACROMOLECULAR RESEARCH | - |
dc.citation.volume | 15 | - |
dc.citation.number | 5 | - |
dc.citation.startPage | 449 | - |
dc.citation.endPage | 458 | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART001072833 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Polymer Science | - |
dc.relation.journalWebOfScienceCategory | Polymer Science | - |
dc.subject.keywordPlus | LAYERED SILICATE NANOCOMPOSITES | - |
dc.subject.keywordPlus | LIQUID-CRYSTALLINE POLYMER | - |
dc.subject.keywordPlus | IN-SITU POLYMERIZATION | - |
dc.subject.keywordPlus | POLYIMIDE-CLAY HYBRID | - |
dc.subject.keywordPlus | MECHANICAL-PROPERTIES | - |
dc.subject.keywordPlus | THERMOMECHANICAL PROPERTIES | - |
dc.subject.keywordPlus | MORPHOLOGY | - |
dc.subject.keywordPlus | COMPOSITES | - |
dc.subject.keywordPlus | POLYPROPYLENE | - |
dc.subject.keywordPlus | EXFOLIATION | - |
dc.subject.keywordAuthor | poly(butylene terephthalate) | - |
dc.subject.keywordAuthor | nanocomposite | - |
dc.subject.keywordAuthor | organoclay | - |
dc.subject.keywordAuthor | fiber | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.