차량도어 조립공차 예측기술 개발
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 정남용 | - |
dc.contributor.author | 조진형 | - |
dc.contributor.author | 오현승 | - |
dc.contributor.author | 이세재 | - |
dc.date.available | 2020-04-24T10:25:41Z | - |
dc.date.created | 2020-03-31 | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 2005-0461 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/356 | - |
dc.description.abstract | The setting of values on door hinge mounting compensation for door assembly tolerance is a constant quality issue in vehicle production. Generally, heuristic methods are used in satisfying appropriate door gap and level difference, flushness to improve quality. However, these methods are influenced by the engineer's skills and working environment and result an increasement of development costs. In order to solve these problems, the system which suggests hinge mounting compensation value using CAE (Computer Aided Engineering) analysis is proposed in this study. A structural analysis model was constructed to predict the door gap and level difference, flushness through CAE based on CAD (Computer Aided Design) data. The deformations of 6-degrees of freedom which can occur in real vehicle doors was considered using a stiffness model which utilize an analysis model. The analysis model was verified using 3D scanning of real vehicle door hinge deformation. Then, system model which applying the structural analysis model suggested the final adjustment amount of the hinge mounting to obtain the target door gap and the level difference by inputting the measured value. The proposed system was validated using the simulation and showed a reliability in vehicle hinge mounting compensation process. This study suggests the possibility of using the CAE analysis for setting values of hinge mounting compensation in actual vehicle production. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국산업경영시스템학회 | - |
dc.title | 차량도어 조립공차 예측기술 개발 | - |
dc.title.alternative | An Advanced Prediction Technology of Assembly Tolerance for Vehicle Door | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 이세재 | - |
dc.identifier.bibliographicCitation | 한국산업경영시스템학회지, v.41, no.4, pp.91 - 100 | - |
dc.citation.title | 한국산업경영시스템학회지 | - |
dc.citation.volume | 41 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 91 | - |
dc.citation.endPage | 100 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002420963 | - |
dc.description.journalClass | 2 | - |
dc.subject.keywordAuthor | Assembly Tolerance | - |
dc.subject.keywordAuthor | Hinge | - |
dc.subject.keywordAuthor | Vehicle Door | - |
dc.subject.keywordAuthor | Gap and Level Difference | - |
dc.subject.keywordAuthor | Flushness | - |
dc.subject.keywordAuthor | CAE Analysis | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.