보정 공정을 포함한 U-채널 성형 공정에서 스프링백의 강건 설계
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김경모 | - |
dc.contributor.author | 인정제 | - |
dc.date.available | 2020-04-24T10:25:53Z | - |
dc.date.created | 2020-03-31 | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 1229-604X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/423 | - |
dc.description.abstract | The most time consuming job in the sheet metal forming process is compensating for springback. Factors such as uneven material properties and process conditions generate noise, which in turn create springback. The springback is very sensitive to the process and noise conditions, and the main effects of the design variables cannot be obtained from mean analysis. Therefore, to achieve minimal springback, an effective design countermeasure must be put in place to reduce noise effects. In this study, two robust design methods toachieve minimal springback in U-channel forming, including compensation process, are proposed. The effectiveness of the proposed methods is shown with an example of the sidewall curl springback. The proposed methods consistently outperform our previous work, indicating that the complex method is more preferable to the mean analysis, if there is no evidence of additivity of effects. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국기계기술학회 | - |
dc.title | 보정 공정을 포함한 U-채널 성형 공정에서 스프링백의 강건 설계 | - |
dc.title.alternative | Robust Design of Springback in U-channel Forming including Compensation Process | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김경모 | - |
dc.identifier.doi | 10.17958/ksmt.20.1.201802.26 | - |
dc.identifier.bibliographicCitation | 한국기계기술학회지, v.20, no.1, pp.26 - 32 | - |
dc.citation.title | 한국기계기술학회지 | - |
dc.citation.volume | 20 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 26 | - |
dc.citation.endPage | 32 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002317506 | - |
dc.description.journalClass | 2 | - |
dc.subject.keywordAuthor | Springback(탄성복원) | - |
dc.subject.keywordAuthor | Robust Design(강건 설계) | - |
dc.subject.keywordAuthor | Sheet Metal Forming(박판 성형) | - |
dc.subject.keywordAuthor | Sidewall Curl(측벽 젖힘) | - |
dc.subject.keywordAuthor | Compensation Process(보정 공정) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.