ScholarWorks@Kumoh: Roh, Jae Seung

Detailed Information

Roh, Jae Seung (노재승)

College of Engineering (Department of Materials Science and Engineering)

Research Area: 탄소재료, 금속재료, Carbon Material, Metallic Material

Tel +82-54-478-7744
Homepage

ResearcherID ORCiD Scopus Google Scholar ID ResearchGate

Keyword

Microstructure:6||bulk graphite:5||crystallinity:5||Emissivity:5||XRD:5||Mechanical properties:4||oxidation:4||carbonization:4||Bulk graphite:4||thermal emissivity:4||Crystallinity:4||Oxidation:4||Carbon fiber:4||impregnant:3||impregnation:3||carbon fiber:3||microstructure:3||Graphite block:3||TEM:3||viscosity:3||Nuclear graphite:3||Raman:2||Composite:2||surface roughness:2||isotropic carbon fiber:2||texture:2||SEM:2||lowfrequency noise:2||PANbased carbon fiber:2||anisotropic:2||mechanical property:2||mesophase:2||Coal tar pitch:2||degree of alignment:2||milled carbon fiber:2||Siwafer:2||Alignment degree:2||Artificial graphite scrap:2||phenolic resin:2||pitch:2||etching:2||carbon block:2||flexural strength:2||Binder:2||graphite block:2||pressure:2||AlGaN:2||graphitization:2||resistivity:2||heat treatment:2||Heating rate:1||Implant:1||Implant core:1||Impregnation temperature:1||Indoor air quality:1||Isothermal heat treatment:1||Isotropic:1||Isotropic coke:1||La:1||Lateral surface reinforcement:1||Magnetic field:1||Mechanical Properties:1||Mesophase:1||Milled carbon fiber:1||Milled carbon fiber · Artificial graphite scrap · Bulk graphite · Degree of alignment · Anisotropic ratio:1||Needle cokes:1||Open porosity:1||Orientation:1||Orientation degrees:1||PAN carbon fiber:1||Particle size:1||Phenolic resin:1||Pitch:1||Polyamide binder:1||Polymeric Composites:1||Polypropylene:1||Porosity:1||Preform:1||Process conditions:1||Pyrolysis (heat treatment):1||Raman.:1||Reinforcement position:1||Rice husk charcoal:1||SPS(Spark Plasma Sintering):1||SSA:1||Shortfiberreinforced thermoplastic (SFT):1||Shrinkage rate:1||Sizing content:1||Solid State Processing:1||Strength:1||Structural parameters:1||Surface treatment:1||Temperature:1||Thermal emissivity:1||Thermoplastic binder:1||Titanium ball:1||Tow spreading:1||UNet segmentation:1||Underground parking garage:1||Unidirectional pressing:1||Ventilation efficiency:1||Xray diffraction:1||Xray diffraction spectroscopy:1||anisotropy ratio:1||artificial graphite:1||ball mill:1||bipolar plate:1||bipolar plates:1||burnoff:1||cap layer:1||carbon and graphite:1||carbon blacks:1||carbon materials:1||carrier number fluctuations:1||coal powder compacts:1||coaltarpitch:1||coating:1||coating.:1||coke:1||cold isostatic pressing:1||composite:1||compression molding:1||compressive strength:1||compressive stress:1||corrosion:1||crystalline structure:1||curing:1||density and porosity:1||electric conductivity:1||electrical conductivity:1||electrical discharge machining:1||electrical resistance:1||electrical resistivity:1||electrochemical impedance spectroscopy:1||electronic parts:1||flexible electrode:1||functional group:1||graphite:1||graphite electrode:1||graphite flakes:1||graphite scrap:1||heating rate:1||hollow carbon ball:1||in situ cap layer:1||isothermal oxidation:1||isotropic nuclear graphite:1||isotropic ratio:1||isotropic synthetic graphite scrap:1||longitudinal hollow pore:1||magnetic field:1||manufacturing:1||materials:1||mechanical milling:1||micropore:1||micropore structures:1||molding:1||morphology:1||nuclear graphite IG11:1||oxidation degrees:1||oxidation resistance:1||particle size:1||phase fraction calculation:1||phosphoric acid fuel cell(PAFC):1||polyacrylonitrilebased carbon fiber:1||polymer electrolyte membrane fuel cell:1||pore structure:1||pores:1||porosimeter:1||porosity:1||porosity.:1||pulse measurement:1||recycling:1||resistance:1||resistivity.:1||scanning electron microscopy (SEM):1||silver nanowire:1||spark plasma sintering:1||steel microstructure:1||surface morphology.:1||tensile property:1||tensile stress:1||thermal decomposition:1||transmission electron microscope:1||공정 변수:1||기계적 물성:1||사이징 함량:1||탄소섬유:1||1/f noise characteristics:1||토우 스프레딩:1||3D printing:1||ACF:1||ACFs:1||AZ31 magnesium alloy:1||Activated carbon:1||Activation:1||AlGaN back barrier layer:1||AlGaN/CaN:1||Alignment:1||Anisotropic ratio:1||Anisotropy ratio:1||Biomass:1||CIP:1||CO2 activation:1||Carbon Nanotubes:1||Carbon blacks:1||Carbon block:1||Carbon fiber reinforced composites:1||Carbon fiber spread tow:1||Carbondoped buffer layer:1||Carbonization:1||Carbonized block:1||Coal tar:1||Coating:1||Coefficient of determination:1||Compacting pressure:1||Compatibilizer:1||Compression time:1||Compressive strength:1||Correlated mobility fluctuations (CMF):1||Deep acceptor:1||Degree of alignment:1||Density:1||EBSD segmentation:1||Electrical Properties:1||FTIR:1||Filler:1||Flexible strength:1||Flexural properties:1||GaN:1||GaN HEMT:1||Graphite:1||Graphite (Carbon) block:1||Graphite flake:1||Graphite flakes:1||Graphitization:1||HEMT:1||HEMTs:1||Hard carbon:1||

STATISTICS: Total View :1,519,092; Today View :784

RSS_1.0 RSS_2.0 ATOM_1.0

350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170

Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.

Detailed Information

Keyword

BROWSE