Numerical Analysis of Pressure and Temperature Effects on Residual Layer Formation in Thermal Nanoimprint Lithography
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이기연 | - |
dc.contributor.author | 김국원 | - |
dc.date.accessioned | 2021-08-12T01:46:08Z | - |
dc.date.available | 2021-08-12T01:46:08Z | - |
dc.date.created | 2021-06-17 | - |
dc.date.issued | 2013 | - |
dc.identifier.issn | 1738-2270 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/sch/handle/2021.sw.sch/14394 | - |
dc.description.abstract | Nanoimprint lithography (NIL) is a next generation technology for fabrication of micrometer and nanometer scale patterns. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. To successfully imprint a nanosized pattern with the thermal NIL, the process conditions such as temperature and pressure should be appropriately selected. This starts with a clear understanding of polymer material behavior during the thermal NIL process. In this paper, a filling process of the polymer resist into nanometer scale cavities during the thermal NIL at the temperature range, where the polymer resist shows the viscoelastic behaviors with consideration of stress relaxation effect of the polymer. In the simulation, the filling process and the residual layer formation are numerically investigated. And the effects of pressure and temperature on NIL process, specially the residual layer formation are discussed. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | 한국반도체디스플레이기술학회 | - |
dc.title | Numerical Analysis of Pressure and Temperature Effects on Residual Layer Formation in Thermal Nanoimprint Lithography | - |
dc.title.alternative | Numerical Analysis of Pressure and Temperature Effects on Residual Layer Formation in Thermal Nanoimprint Lithography | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김국원 | - |
dc.identifier.bibliographicCitation | 반도체디스플레이기술학회지, v.12, no.2, pp.93 - 98 | - |
dc.relation.isPartOf | 반도체디스플레이기술학회지 | - |
dc.citation.title | 반도체디스플레이기술학회지 | - |
dc.citation.volume | 12 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 93 | - |
dc.citation.endPage | 98 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001786821 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Thermal Nanoimprint Lithography | - |
dc.subject.keywordAuthor | Viscoelastic | - |
dc.subject.keywordAuthor | Residual Layer Formation | - |
dc.subject.keywordAuthor | Pressure | - |
dc.subject.keywordAuthor | Temperature | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(31538) 22, Soonchunhyang-ro, Asan-si, Chungcheongnam-do, Republic of Korea+82-41-530-1114
COPYRIGHT 2021 by SOONCHUNHYANG UNIVERSITY ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.