Three-dimensional surface printing method for interconnecting electrodes on opposite sides of substrates
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Rahman, Md. Khalilur | - |
dc.contributor.author | Kim, Seong-jun | - |
dc.contributor.author | Thanh Huy Phung | - |
dc.contributor.author | Lee, Jin-Sol | - |
dc.contributor.author | Yu, Jaeryul | - |
dc.contributor.author | Kwon, Kye-Si | - |
dc.date.accessioned | 2021-09-10T06:47:45Z | - |
dc.date.available | 2021-09-10T06:47:45Z | - |
dc.date.issued | 2020-10-29 | - |
dc.identifier.issn | 2045-2322 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/sch/handle/2021.sw.sch/19421 | - |
dc.description.abstract | As the application of the direct printing method becomes diversified, printing on substrates with non-flat surfaces is increasingly required. However, printing on three-dimensional surfaces suffers from a number of difficulties, which include ink flow due to gravity, and the connection of print lines over sharp edges. This study presents an effective way to print a fine pattern (similar to 30 mu m) on three different faces with sharp edge boundaries. The method uses a deflectable and stretchable jet stream of conductive ink, which is produced by near-field electrospinning (NFES) technique. Due to added polymer in the ink, the jet stream from the nozzle is less likely to be disconnected, even when it is deposited over sharp edges of objects. As a practical industrial application, we demonstrate that the method can be effectively used for recent display applications, which require the connection of electrical signal and power on both sides of the glass. When the total length of printed lines along the 'Pi' shaped glass surfaces was 1.2 mm, we could achieve the average resistance of 0.84 Omega. | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | Nature Publishing Group | - |
dc.title | Three-dimensional surface printing method for interconnecting electrodes on opposite sides of substrates | - |
dc.type | Article | - |
dc.publisher.location | 영국 | - |
dc.identifier.doi | 10.1038/s41598-020-75556-x | - |
dc.identifier.scopusid | 2-s2.0-85094680133 | - |
dc.identifier.wosid | 000587692300042 | - |
dc.identifier.bibliographicCitation | Scientific Reports, v.10, no.1 | - |
dc.citation.title | Scientific Reports | - |
dc.citation.volume | 10 | - |
dc.citation.number | 1 | - |
dc.type.docType | Article | - |
dc.description.isOpenAccess | Y | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Science & Technology - Other Topics | - |
dc.relation.journalWebOfScienceCategory | Multidisciplinary Sciences | - |
dc.subject.keywordPlus | INKJET | - |
dc.subject.keywordPlus | LASER | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
(31538) 22, Soonchunhyang-ro, Asan-si, Chungcheongnam-do, Republic of Korea+82-41-530-1114
COPYRIGHT 2021 by SOONCHUNHYANG UNIVERSITY ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.