Detailed Information
Cited 2 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
Joining of RBSiC using a preceramic polymer with Al
- Authors
- Lee, DH[Lee, Dong-Hwa]; Jang, HW[Jang, Hyeon-Woo]; Kim, DJ[Kim, Deug-Joong]; Chun, DI[Chun, Dong-Il]; Kim, YS[Kim, Young-Seok]
- Issue Date
- Jun-2009
- Publisher
- KOREAN ASSOC CRYSTAL GROWTH, INC
- Keywords
- RBSiC; Joining; Preceramic polymer; AL
- Citation
- JOURNAL OF CERAMIC PROCESSING RESEARCH, v.10, no.3, pp.263 - 265
- Indexed
- SCIE
SCOPUS
KCI
- Journal Title
- JOURNAL OF CERAMIC PROCESSING RESEARCH
- Volume
- 10
- Number
- 3
- Start Page
- 263
- End Page
- 265
- ISSN
- 1229-9162
- Abstract
- Reaction-bonded silicon carbide (RBSiC) was joined using a preceramic polymer with Al as the filler. Commercial reaction bonded SiC was used for the joining experiments. The polymer-filler mixture powders were dissolved in isopropanol to produce a paste, which was then applied homogeneously to the surface of the specimens to be joined. The samples were subsequently overlapped to obtain a sandwich structure. Brazing experiments with Al as the filler were carried out in a vacuum furnace heated to 1000-1200 degrees C. The joining layer appeared fairly dense with good adhesion to the RBSiC. The highest strength of 206 MPa was obtained at 1200 degrees C for 30 minutes.
- Files in This Item
- There are no files associated with this item.
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.