아크릴의 전기방사시 방사조건이 웹 형성에 미치는 영향Effect of Spinning Conditions on the Fiberweb Properties of Acrylics during Electrospinning
- Other Titles
- Effect of Spinning Conditions on the Fiberweb Properties of Acrylics during Electrospinning
- Authors
- 심현주; 이승훈
- Issue Date
- Dec-2004
- Publisher
- 한국섬유공학회
- Keywords
- electrospinning; acryl; fiberweb; DCD; electrospinning; acryl; fiberweb; DCD
- Citation
- 한국섬유공학회지, v.41, no.6, pp.413 - 418
- Journal Title
- 한국섬유공학회지
- Volume
- 41
- Number
- 6
- Start Page
- 413
- End Page
- 418
- URI
- http://scholarworks.bwise.kr/ssu/handle/2018.sw.ssu/20560
- ISSN
- 1225-1089
- Abstract
- The electro-spinning conditions, such as, concentration of polymer solution, electric potential, die to collector distance(DCD), electric conductivity of collector, and additives on the change of fiberweb structure and fiber diameter, have been investigated. The results showed that the electric potential and die to collector distance affect the fiber diameter and the fiberweb uniformity. The difference of the electric conductivity of collector and the additives did not affect the fiber diameter, however, the uniformity of the fiberweb was significantly affected. The optimum spinning conditions for the electrospinning of polyacrylonitrile were found as follows; the electrical potential should be in the range of 25 to 30 kV, the DCD 15 cm, and the concentration of polymer solution should be between 12 to 15%.
- Files in This Item
-
Go to Link
- Appears in
Collections - College of Engineering > ETC > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.