Detailed Information

Cited 6 time in webofscience Cited 6 time in scopus
Metadata Downloads

Effect of aluminum oxide and reduced graphene oxide mixtures on critical heat flux enhancement

Authors
Kim, Ji HoonKim, Ji MinJerng, Dong WookKim, Eun YoungAhn, Ho Seon
Issue Date
Jan-2018
Publisher
PERGAMON-ELSEVIER SCIENCE LTD
Citation
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.116, pp 858 - 870
Pages
13
Journal Title
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
Volume
116
Start Page
858
End Page
870
URI
https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/1334
DOI
10.1016/j.ijheatmasstransfer.2017.09.063
ISSN
0017-9310
1879-2189
Abstract
Pool boiling experiments were carried out to investigate critical heat flux (CHF) characteristics in mixtures of aluminum oxide (AI(2)O(3)) nanoparticles and reduced graphene oxide (RGO) colloids under saturated temperature and atmospheric pressure conditions. Nichrome (Ni-Cr) wire (diameter: 0.2 mm; length: 85 mm) was fixed between electrodes horizontally and heated using Joule heating. The working fluids were prepared using different concentrations of AI(2)O(3) suspension (0.0001-0.01 vol%) and RGO colloids (0.00005-0.005 vol%), in concentration ratios varying from 0.25 to 10. Deionized water was used as a control. In the AI(2)O(3) suspensions, the CHF increased with concentration, showing a saturated enhancement of 54% above 0.001 vol% concentration. In the RGO colloids, CHF enhancement varied between 10 and 37% as the concentration increased. A dramatic CHF enhancement of 473% was observed when the AI(2)O(3)/RGO mixture was equally mixed at 0.0005 vol% of each (sample: A0005R0005). Upon completion of the pool boiling experiments, a coating layer was observed on each specimen; the coating layer and specimen surface were characterized using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. When AI(2)O(3) and RGO were used as individual working fluids, the morphologic characteristics of the coating layer were similar to typical shapes seen in previous reports. Upon altering the concentration ratio, different clusters of AI(2)O(3) and RGO flakes appeared in the coating layer, providing coating layers of different appearances. A porous superstructure formed in A0005R0005 and the macrostructure consisted of AI(2)O(3) and RGO agglomerations. The enhancement mechanisms could not be explained based solely on the hydrophilic contact angle. Therefore, an additional experiment to quantify capillary flow rate through the porous media was performed with consideration of the marginal heat flux gain. (C) 2017 Elsevier Ltd. All rights reserved.
Files in This Item
There are no files associated with this item.
Appears in
Collections
College of Engineering > School of Energy System Engineering > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher Jerng, Dong Wook photo

Jerng, Dong Wook
공과대학 (에너지시스템 공학부)
Read more

Altmetrics

Total Views & Downloads

BROWSE