Experimental and finite element analysis for fracture of coating layer of galvannealed steel sheet
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, S. I. | - |
dc.contributor.author | Her, J. U. | - |
dc.contributor.author | Jang, Y. C. | - |
dc.contributor.author | Lee, Y. | - |
dc.date.available | 2019-05-29T13:39:53Z | - |
dc.date.issued | 2011-03 | - |
dc.identifier.issn | 1003-6326 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/21723 | - |
dc.description.abstract | Mechanical properties of galvannealed (GA) steel sheet used for automotive exposed panel and predicted failure phenomenon of its coating layer were evaluated using finite element method. V-bending test was performed to understand better the fracture of coating layer of GA steel sheet during plastic deformation. Yield strength of the coating layer was calculated by using a relative difference between hardness of coating layer measured from the nano-indentation test and that of substrate. To measure shearing strength at the interface between substrate and coating layer, shearing test with two specimens attached by an adhesive was carried out. Using the mechanical properties measured, a series of finite element analyses coupled with a failure model was performed. Results reveal that the fracture of coating layer occurs in an irregular manner at the region where compressive deformation is dominant. Meanwhile, a series of vertical cracks perpendicular to material surface are observed at the tensile stressed-region. It is found that 0.26-0.28 of local equivalent plastic strain exists at the coating and substrate at the beginning of failure. The fracture of coating layer depends on ductility of the coating layer considerably as well. | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | ELSEVIER SCIENCE BV | - |
dc.title | Experimental and finite element analysis for fracture of coating layer of galvannealed steel sheet | - |
dc.type | Article | - |
dc.identifier.doi | 10.1016/S1003-6326(11)61072-8 | - |
dc.identifier.bibliographicCitation | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, v.21, no.SUPPL. 1, pp S111 - S116 | - |
dc.description.isOpenAccess | N | - |
dc.identifier.wosid | 000290093400023 | - |
dc.identifier.scopusid | 2-s2.0-79955611160 | - |
dc.citation.endPage | S116 | - |
dc.citation.number | SUPPL. 1 | - |
dc.citation.startPage | S111 | - |
dc.citation.title | TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | - |
dc.citation.volume | 21 | - |
dc.type.docType | Article | - |
dc.publisher.location | 네델란드 | - |
dc.subject.keywordAuthor | galvannealed steel sheet | - |
dc.subject.keywordAuthor | fracture simulation | - |
dc.subject.keywordAuthor | coating layer | - |
dc.subject.keywordAuthor | finite element analysis | - |
dc.subject.keywordAuthor | failure model | - |
dc.subject.keywordPlus | SHEAR-STRENGTH | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
84, Heukseok-ro, Dongjak-gu, Seoul, Republic of Korea (06974)02-820-6194
COPYRIGHT 2019 Chung-Ang University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.