Creep deformation characteristics of microalloyed HP40Nb steel at 950 degrees C
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Dao, Van Hung | - |
dc.contributor.author | Song, Jung Soo | - |
dc.contributor.author | Kim, Joo Yong | - |
dc.contributor.author | Yoon, Kee Bong | - |
dc.date.available | 2020-04-03T01:56:12Z | - |
dc.date.issued | 2019-10 | - |
dc.identifier.issn | 1738-494X | - |
dc.identifier.issn | 1976-3824 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/37887 | - |
dc.description.abstract | In the present work, several specimens were obtained from microalloyed HP40Nb reformer tubes with the different serviced period. The creep tests were conducted at a temperature of 950 degrees C and under stress levels in the range 25-55 MPa. Results indicated that the degradation of the creep life was due to the increase of the serviced period. The microstructural degradation and creep voids were observed at the grain boundary regions, attributed to the main reason leading to the premature creep failure. The creep exponent started decreasing after the servicing and approached a constant value after 7.2 years. The creep coefficient was obtained to be a function of time when the creep exponent was constant. Norton's creep power law equation was used to derive an equation describing the relationship between the diametrical expansion and serviced period of the reformer tubes. Larson-Miller curves were obtained from creep test data. Amount of carbides from the different serviced period was also calculated. | - |
dc.format.extent | 9 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | KOREAN SOC MECHANICAL ENGINEERS | - |
dc.title | Creep deformation characteristics of microalloyed HP40Nb steel at 950 degrees C | - |
dc.type | Article | - |
dc.identifier.doi | 10.1007/s12206-019-0922-9 | - |
dc.identifier.bibliographicCitation | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, v.33, no.10, pp 4813 - 4821 | - |
dc.identifier.kciid | ART002509679 | - |
dc.description.isOpenAccess | N | - |
dc.identifier.wosid | 000500192700024 | - |
dc.identifier.scopusid | 2-s2.0-85074202238 | - |
dc.citation.endPage | 4821 | - |
dc.citation.number | 10 | - |
dc.citation.startPage | 4813 | - |
dc.citation.title | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | - |
dc.citation.volume | 33 | - |
dc.type.docType | Article; Early Access | - |
dc.publisher.location | 대한민국 | - |
dc.subject.keywordAuthor | HP40Nb alloy | - |
dc.subject.keywordAuthor | Reformer tube | - |
dc.subject.keywordAuthor | Carbide | - |
dc.subject.keywordAuthor | Creep test | - |
dc.subject.keywordAuthor | Larson-Miller parameter | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | TITANIUM | - |
dc.subject.keywordPlus | FAILURE | - |
dc.subject.keywordPlus | NB | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
84, Heukseok-ro, Dongjak-gu, Seoul, Republic of Korea (06974)02-820-6194
COPYRIGHT 2019 Chung-Ang University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.