Analysis and design of thermal double-cantilever bimorph actuators for rotating-type micromirrors
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, D. | - |
dc.contributor.author | Kwon, O. | - |
dc.contributor.author | Oh, K.S. | - |
dc.contributor.author | Choi, Y.K. | - |
dc.contributor.author | Park, S. | - |
dc.contributor.author | Lee, J.S. | - |
dc.date.accessioned | 2021-12-01T01:40:08Z | - |
dc.date.available | 2021-12-01T01:40:08Z | - |
dc.date.issued | 2008 | - |
dc.identifier.issn | 0000-0000 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/52108 | - |
dc.description.abstract | This paper reports the design and simulation of thermal double-cantilever bimorph(TDCB) actuators that can be used to drive micromirrors efficiently. A TDCB actuator combines two paralleled bimorph actuators acting in opposite directions for rotational control of micromirrors. Each actuator is structured by nickel and silicon dioxide thin films with an embedded polysilicon line as a heat source. With a size of only 20 μ m width and 100μm length, TDCB actuators result in vertical displacement of 28 μ m at 11 volts DC which is a significant improvement, comparing to the conventional thermal bimorph actuators. Copyright © 2008 by ASME. | - |
dc.format.extent | 5 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.title | Analysis and design of thermal double-cantilever bimorph actuators for rotating-type micromirrors | - |
dc.type | Article | - |
dc.identifier.doi | 10.1115/MNHT2008-52085 | - |
dc.identifier.bibliographicCitation | 2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008, v.PART B, pp 1063 - 1067 | - |
dc.description.isOpenAccess | N | - |
dc.identifier.scopusid | 2-s2.0-49449099342 | - |
dc.citation.endPage | 1067 | - |
dc.citation.startPage | 1063 | - |
dc.citation.title | 2008 Proceedings of the ASME Micro/Nanoscale Heat Transfer International Conference, MNHT 2008 | - |
dc.citation.volume | PART B | - |
dc.type.docType | Conference Paper | - |
dc.subject.keywordAuthor | Intellisuite | - |
dc.subject.keywordAuthor | Micro actuators | - |
dc.subject.keywordAuthor | Thermal double-cantilever bimorph actuators | - |
dc.subject.keywordAuthor | Thermal expansion | - |
dc.subject.keywordPlus | Intellisuite | - |
dc.subject.keywordPlus | Micro actuators | - |
dc.subject.keywordPlus | Micro-mirrors | - |
dc.subject.keywordPlus | Thermal double-cantilever bimorph actuators | - |
dc.subject.keywordPlus | Thermal expansion | - |
dc.subject.keywordPlus | Heat exchangers | - |
dc.subject.keywordPlus | Heat transfer | - |
dc.subject.keywordPlus | Heating equipment | - |
dc.subject.keywordPlus | Polysilicon | - |
dc.subject.keywordPlus | Silica | - |
dc.subject.keywordPlus | Thermoanalysis | - |
dc.subject.keywordPlus | Thick films | - |
dc.subject.keywordPlus | Actuators | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
84, Heukseok-ro, Dongjak-gu, Seoul, Republic of Korea (06974)02-820-6194
COPYRIGHT 2019 Chung-Ang University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.