Residual stress evaluation of thin film using strip bending test
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, J.-H. | - |
dc.contributor.author | Lee, H.-J. | - |
dc.contributor.author | Han, S.-W. | - |
dc.contributor.author | Kim, J.-M. | - |
dc.contributor.author | Baek, C.-W. | - |
dc.date.accessioned | 2022-04-12T09:40:09Z | - |
dc.date.available | 2022-04-12T09:40:09Z | - |
dc.date.issued | 2006 | - |
dc.identifier.issn | 1013-9826 | - |
dc.identifier.issn | 1662-9795 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/56324 | - |
dc.description.abstract | In this study, we use the strip-bending test to measure the residual stress of a thin film structure. The principle of the strip bending test and the test procedures are described and the analysis of the strip deformation is presented. The explicit formula for estimating the residual stress is given, which requires the initial stress as an input. As an example, the E-beam evaporated Au thin film is chosen, and the residual stress is measured by the present method. The Au thin film structure has a tensile or compressive residual stress depending on the film thickness. The tensile and the compressive residual stresses of Au thin film are successfully measured by the present method. | - |
dc.format.extent | 4 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | Trans Tech Publications Ltd | - |
dc.title | Residual stress evaluation of thin film using strip bending test | - |
dc.type | Article | - |
dc.identifier.doi | 10.4028/0-87849-412-x.121 | - |
dc.identifier.bibliographicCitation | Key Engineering Materials, v.321-323 I, pp 121 - 124 | - |
dc.description.isOpenAccess | N | - |
dc.identifier.scopusid | 2-s2.0-33749582814 | - |
dc.citation.endPage | 124 | - |
dc.citation.startPage | 121 | - |
dc.citation.title | Key Engineering Materials | - |
dc.citation.volume | 321-323 I | - |
dc.type.docType | Conference Paper | - |
dc.publisher.location | 스위스 | - |
dc.subject.keywordAuthor | Au thin film | - |
dc.subject.keywordAuthor | Initial stress | - |
dc.subject.keywordAuthor | MEMS | - |
dc.subject.keywordAuthor | Residual stress | - |
dc.subject.keywordAuthor | Strip bending test | - |
dc.subject.keywordPlus | Au thin film | - |
dc.subject.keywordPlus | Initial stress | - |
dc.subject.keywordPlus | Strip bending test | - |
dc.subject.keywordPlus | Bending (deformation) | - |
dc.subject.keywordPlus | Microelectromechanical devices | - |
dc.subject.keywordPlus | Residual stresses | - |
dc.subject.keywordPlus | Thin films | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
84, Heukseok-ro, Dongjak-gu, Seoul, Republic of Korea (06974)02-820-6194
COPYRIGHT 2019 Chung-Ang University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.