Erratum to: Fabrication of microstrip patch antenna using novel hybrid printing technology (Microwave and Optical Technology Letters, (2016), 58, 11, (2602-2606), 10.1002/mop.30110)

Abstract

In the above-mentioned article, which appeared in Microwave and Optical Technology Letters, Volume 58#11, DOI 30110, the corresponding author information was missing. The correction is shown below: 1School of Electrical and Electronics Engineering, Chung- Ang University, Seoul, Korea; Corresponding author: sungjoon@cau.ac.kr 2School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA; Corresponding author: etentze@ece.gatech.edu In addition, incorrect acknowledgments were included. The correction is shown below: ACKNOWLEDGMENTS This research was supported by the MSIP (Ministry of Science, ICT and Future Planning), Korea, under the ITRC (Information Technology Research Center) support program (IITP-2016- H8501-16-1007) supervised by the IITP (Institute for Information & communications Technology Promotion) and the Chung- Ang University Research Grants in 2015. The authors regret any confusion caused by these errors. © 2016 Wiley Periodicals, Inc.