Crack-closing of cement mortar beams using NiTi cold-drawn SMA short fibers
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi, Eunsoo | - |
dc.contributor.author | Kim, Dong Joo | - |
dc.contributor.author | Chung, Young-Soo | - |
dc.contributor.author | Kim, Hee Sun | - |
dc.contributor.author | Jung, Chungsung | - |
dc.date.accessioned | 2023-03-08T19:32:28Z | - |
dc.date.available | 2023-03-08T19:32:28Z | - |
dc.date.issued | 2015-01 | - |
dc.identifier.issn | 0964-1726 | - |
dc.identifier.issn | 1361-665X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/64651 | - |
dc.description.abstract | In this study, crack-closing tests of mortar beams reinforced by shape memory alloy (SMA) short fibers were performed. For this purpose, NiTi SMA fibers with a diameter of 0.965 mm and a length of 30 mm were made from SMA wires of 1.0 mm diameter by cold drawing. Four types of SMA fibers were prepared, namely, straight and dog-bone-shaped fiber and the two types of fibers with paper wrapping in the middle of the fibers. The paper provides an unbonded length of 15 mm. For bending tests, six types of mortar beams with the dimensions of 40 mm x 40 mm x 160 mm (BxHxL) were prepared. The SMA fibers were placed at the bottom center of the beams along with an artificial crack of 10 mm depth and 1 mm thickness. This study investigated the influence of SMA fibers on the flexural strength of the beams from the measured force-deflection curves. After cracking, the beams were heated at the bottom by fire to activate the SMA fibers. Then, the beams recovered the deflection, and the cracks were closed. This study evaluated crack-closing capacity using the degree of crack recovery and deflection-recovery factor. The first factor is estimated from the crack-width before and after crack-closing, and the second one is obtained from the downward deflection due to loading and the upward deflection due to the closing force of the SMA fibers. | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | IOP PUBLISHING LTD | - |
dc.title | Crack-closing of cement mortar beams using NiTi cold-drawn SMA short fibers | - |
dc.type | Article | - |
dc.identifier.doi | 10.1088/0964-1726/24/1/015018 | - |
dc.identifier.bibliographicCitation | SMART MATERIALS AND STRUCTURES, v.24, no.1 | - |
dc.description.isOpenAccess | N | - |
dc.identifier.wosid | 000348455700019 | - |
dc.identifier.scopusid | 2-s2.0-84916608160 | - |
dc.citation.number | 1 | - |
dc.citation.title | SMART MATERIALS AND STRUCTURES | - |
dc.citation.volume | 24 | - |
dc.type.docType | Article | - |
dc.publisher.location | 영국 | - |
dc.subject.keywordAuthor | SMA short fibers | - |
dc.subject.keywordAuthor | crack-closing | - |
dc.subject.keywordAuthor | shape memory effect | - |
dc.subject.keywordAuthor | bending tests | - |
dc.subject.keywordAuthor | dog-bone shape | - |
dc.subject.keywordPlus | SHAPE-MEMORY ALLOY | - |
dc.subject.keywordPlus | REINFORCED-CONCRETE | - |
dc.subject.keywordPlus | FEASIBILITY | - |
dc.subject.keywordPlus | BEHAVIOR | - |
dc.subject.keywordPlus | WIRES | - |
dc.relation.journalResearchArea | Instruments & Instrumentation | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Instruments & Instrumentation | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.description.journalRegisteredClass | sci | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
84, Heukseok-ro, Dongjak-gu, Seoul, Republic of Korea (06974)02-820-6194
COPYRIGHT 2019 Chung-Ang University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.