Optimization of the structural and process parameters in the sheet metal forming process
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Jae-Jun | - |
dc.contributor.author | Park, Gyung-Jin | - |
dc.date.accessioned | 2021-06-23T00:05:10Z | - |
dc.date.available | 2021-06-23T00:05:10Z | - |
dc.date.issued | 2014-02 | - |
dc.identifier.issn | 1738-494X | - |
dc.identifier.issn | 1976-3824 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/23763 | - |
dc.description.abstract | The quality of the sheet metal forming product is determined by defects such as wrinkling, springback, etc. Optimization techniques can avoid such defects while the desired final shape is obtained. The design variables of the optimization process consist of the structural parameters and process parameters. The structural parameters are the initial blank shape, geometry, etc. and the process parameters are the blank holding force (BHF), the drawbead restraining force (DBRF), etc. In this paper, the two groups of parameters are separately optimized. The structural parameters are optimized by the equivalent static loads method for non linear static response structural optimization (ESLSO) and the process parameters are optimized by the response surface method (RSM). A couple of examples are solved by the iterative use of ESLSO and RSM, and the solutions are discussed. | - |
dc.format.extent | 15 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | 대한기계학회 | - |
dc.title | Optimization of the structural and process parameters in the sheet metal forming process | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.doi | 10.1007/s12206-013-1125-4 | - |
dc.identifier.scopusid | 2-s2.0-84905035898 | - |
dc.identifier.wosid | 000331760200021 | - |
dc.identifier.bibliographicCitation | Journal of Mechanical Science and Technology, v.28, no.2, pp 605 - 619 | - |
dc.citation.title | Journal of Mechanical Science and Technology | - |
dc.citation.volume | 28 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 605 | - |
dc.citation.endPage | 619 | - |
dc.type.docType | Article | - |
dc.identifier.kciid | ART001847286 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.subject.keywordPlus | MULTISTEP INVERSE ANALYSIS | - |
dc.subject.keywordPlus | BLANK DESIGN | - |
dc.subject.keywordPlus | EQUIVALENT | - |
dc.subject.keywordPlus | PREDICTION | - |
dc.subject.keywordPlus | LOADS | - |
dc.subject.keywordAuthor | Equivalent static loads (ESL) | - |
dc.subject.keywordAuthor | Equivalent static loads method for non linear static response structural optimization (ESLSO) | - |
dc.subject.keywordAuthor | Sheet metal forming | - |
dc.subject.keywordAuthor | ESLs for the nonlinear strains | - |
dc.subject.keywordAuthor | Response surface method (RSM) | - |
dc.identifier.url | https://link.springer.com/article/10.1007%2Fs12206-013-1125-4 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.