Influence of ternary elements (X = Si, B, Cr) on TiAlN coating deposited by magnetron sputtering process with single alloying targets
- Authors
- Jung, Duck Hyeong; Moon, Kyoung Il; Shin, Seung Yong; Lee, Sunyong Caroline
- Issue Date
- Nov-2013
- Publisher
- Elsevier Sequoia
- Keywords
- Ti-Al-X-N ternary coatings; Single alloying target; Magnetron sputtering process; Nano-composite coating; Adding third elements (Si, B and Cr)
- Citation
- Thin Solid Films, v.546, pp.242 - 245
- Indexed
- SCIE
SCOPUS
- Journal Title
- Thin Solid Films
- Volume
- 546
- Start Page
- 242
- End Page
- 245
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/26325
- DOI
- 10.1016/j.tsf.2013.05.046
- ISSN
- 0040-6090
- Abstract
- Ti-Al based single alloying targets were prepared by mechanical alloying and spark plasma sintering. Also, Si, B, and Cr added targets were prepared to improve wear and corrosion properties. The investigation on the alloying targets showed that their microstructures were about 20-30 nm in size and all the elements were homogeneously distributed. Ternary Ti-Al-based coatings were deposited by magnetron sputtering method with various alloying targets, such as TiAlSi, TiAlB and TiAlCr. The composition of the coating was almost the same with that of the target. Their microstructures and mechanical properties were investigated by X-ray diffractometer, field emission scanning electron microscope, nano-indenter, tribometer and etc. Moreover, effects of 3rd element on the wear and corrosion properties of Ti-Al-N based coatings were studied here. From the results of TiAlN-X coating properties, the sample coated with TiAlN-B showed the highest hardness. Moreover, TiAlN-Cr coatings showed the best friction coefficient in oil condition and best corrosion resistance with the lowest corrosion current density. Therefore, easy method of coating TiAlN with ternary element using single target, was demonstrated as well as its improved structural properties. (C) 2013 Elsevier B.V. All rights reserved.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/26325)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.