Development and Structural Assessment of Joints of Permanent Uni-Wall System and Floor Systems in Substructure
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 천성철 | - |
dc.contributor.author | 김승훈 | - |
dc.contributor.author | 노삼영 | - |
dc.contributor.author | 김갑수 | - |
dc.contributor.author | 한범석 | - |
dc.date.accessioned | 2021-06-23T09:06:39Z | - |
dc.date.available | 2021-06-23T09:06:39Z | - |
dc.date.created | 2021-01-22 | - |
dc.date.issued | 2012-04 | - |
dc.identifier.issn | 1598-2033 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/35766 | - |
dc.description.abstract | Recently the Permanent Uni-wall System (PUS) has been developed which improved the disadvantage of the Cast-In-Place Concrete Pile (CIP) and could be used as permanent retaining wall. In this study, joints between PUS and floor systems were developed. From analyses of the characteristics of design and construction of PUS, shear friction reinforcements with couplers were adopted for shear design of the joints. Twelve types of joints were developed which were classified according to the types of floor structures, wale, and piles of PUS. Two typical joints were tested and the joints showed satisfactory behaviors on the points of shear strength, stiffness, and serviceability. Especially the shear strengths were much higher than the design strengths due to the shear keys which were by-products in splicing shear reinforcements. However, the shear strength of the joint is recommended to be designed by only shear friction reinforcement because shear key is not reliable and too brittle. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | 한국건축시공학회 | - |
dc.title | Development and Structural Assessment of Joints of Permanent Uni-Wall System and Floor Systems in Substructure | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 노삼영 | - |
dc.identifier.doi | 10.5345/JKIBC.2012.12.2.230 | - |
dc.identifier.bibliographicCitation | 한국건축시공학회지, v.12, no.2, pp.230 - 242 | - |
dc.relation.isPartOf | 한국건축시공학회지 | - |
dc.citation.title | 한국건축시공학회지 | - |
dc.citation.volume | 12 | - |
dc.citation.number | 2 | - |
dc.citation.startPage | 230 | - |
dc.citation.endPage | 242 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001652787 | - |
dc.description.journalClass | 2 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | CIP | - |
dc.subject.keywordAuthor | uni-wall method | - |
dc.subject.keywordAuthor | retaining wall | - |
dc.subject.keywordAuthor | shear friction | - |
dc.subject.keywordAuthor | wall-floor joint | - |
dc.identifier.url | https://kiss.kstudy.com/thesis/thesis-view.asp?key=3439162 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.