건식법으로 1-Octanethiol 코팅한 Cu 나노 분말 잉크의 잉크젯 인쇄 기술 적용Inkjet Printing Using Cu Nano Powder Ink Coated with 1-Octanethiol in Dry Method
- Other Titles
- Inkjet Printing Using Cu Nano Powder Ink Coated with 1-Octanethiol in Dry Method
- Authors
- 허재학; 박신영; MD. Mominul Haque; 이선영
- Issue Date
- Aug-2011
- Publisher
- 한국분말야금학회
- Keywords
- Inkjet; Cu Powder; 1-Octanethiol Coating; 1-Octanol
- Citation
- 한국분말야금학회지, v.18, no.4, pp.322 - 326
- Indexed
- KCI
- Journal Title
- 한국분말야금학회지
- Volume
- 18
- Number
- 4
- Start Page
- 322
- End Page
- 326
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/38869
- DOI
- 10.4150/KPMI.2011.18.4.322
- ISSN
- 1225-7591
- Abstract
- Inkjet printing was successfully done using Cu nano powder ink after these Cu nano powders were dry-coated with 1-octanethiol for oxidation prevention. 1-octanethiol, which is Self-Assembled Multi-layers (SAMs), was coated approximately 10-nm thick on the surface of Cu nano powders. 1-Octanol, which has the same chain length as that for 1-octanethiol, was used as a solvent to make the ink for inkjet printing. As a result,the fabricated ink was dispersed for about 4 weeks, and after printing and heat treatment at 350oC for 4 hours, the resistivity for the printed pattern was measured to be 1.15×10^(−5)Ω · cm.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.