DEFLECTION TEST AND TRANSMISSION ERROR MEASUREMENT TO IDENTIFY HYPOID GEAR WHINE NOISE
DC Field | Value | Language |
---|---|---|
dc.contributor.author | YOON, J.H. | - |
dc.contributor.author | CHOI, B. J. | - |
dc.contributor.author | YANG, I. H. | - |
dc.contributor.author | Oh, J. E. | - |
dc.date.accessioned | 2021-06-23T12:02:37Z | - |
dc.date.available | 2021-06-23T12:02:37Z | - |
dc.date.created | 2021-01-22 | - |
dc.date.issued | 2011-02 | - |
dc.identifier.issn | 1229-9138 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/39040 | - |
dc.description.abstract | Hypoid gears are commonly used in rear-drive and 4WD (4 Wheel Drive) vehicle axles. Investigating their sensitivity to deflections is one of the most important aspects of their design and optimization procedures. Therefore, a deflection test was performed in this study in the actual gear mounting using completely processed gear. This test covered the full operating range of gear loads from “no load” to “peak load”. Under peak load, the contact pattern extended to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface. The transmission error was tested under an axle assembly triaxial-real-car-load condition. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | 한국자동차공학회 | - |
dc.title | DEFLECTION TEST AND TRANSMISSION ERROR MEASUREMENT TO IDENTIFY HYPOID GEAR WHINE NOISE | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | YOON, J.H. | - |
dc.identifier.doi | 10.1007/s12239-011-0008-x | - |
dc.identifier.scopusid | 2-s2.0-79551697197 | - |
dc.identifier.wosid | 000286908800008 | - |
dc.identifier.bibliographicCitation | International Journal of Automotive Technology, v.12, no.1, pp.59 - 66 | - |
dc.relation.isPartOf | International Journal of Automotive Technology | - |
dc.citation.title | International Journal of Automotive Technology | - |
dc.citation.volume | 12 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 59 | - |
dc.citation.endPage | 66 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001521487 | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Transportation | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.relation.journalWebOfScienceCategory | Transportation Science & Technology | - |
dc.subject.keywordAuthor | Hypoid gear | - |
dc.subject.keywordAuthor | Deflection test | - |
dc.subject.keywordAuthor | Transmission error | - |
dc.subject.keywordAuthor | Gear whine noise | - |
dc.subject.keywordAuthor | Axle | - |
dc.identifier.url | https://link.springer.com/article/10.1007/s12239-011-0008-x | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.