A study of the characteristics of mixture formation and combustion in a PCCI engine using an early multiple injection strategy
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Hyung-min | - |
dc.contributor.author | Kitn, Yung-jin | - |
dc.contributor.author | Lee, Ki-hyung | - |
dc.date.accessioned | 2021-06-23T17:40:53Z | - |
dc.date.available | 2021-06-23T17:40:53Z | - |
dc.date.created | 2021-01-21 | - |
dc.date.issued | 2008-05 | - |
dc.identifier.issn | 0887-0624 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/42528 | - |
dc.description.abstract | As world attention has focused on global warming and air pollution, high-efficiency diesel engines with low CO2 emissions have become more attractive. Premixed diesel engines in particular have the potential to achieve a more homogeneous mixture in the cylinder which results in lower NO, and soot emission. It is well-known that the injection strategies such as the injection timing and the spray included angle are important to create the optimal mixture formation for a PCCI (premixed charge compression ignition) engine. In this research, we investigated the effect of injection angle, injection timing, and frequency on the combustion and mixture formation in a direct injection type PCCI engine using an early multiple injection strategy. The experimental results showed that the mixture formation, IMEP, and emission characteristics in the PCCI engine were dominantly affected by the fuel injection timing and spray included angle. In particular, the injection timing of 65 degrees BTDC with the spray included angle of 100 degrees effectively reduced the smoke emission in the early single injection case. In other words, the smoke number was less than 1 FSN when the IMEP exceeded 3.5 bar. The multiple injection method also resulted in more homogeneous mixture formation due to decrease in spray penetration and increase in the total amount of fuel evaporation in the combustion bowl. In addition, a simulation was conducted in order to estimate the mixture distribution within the cylinder according to injection conditions such as spray included angle and injection timing. The simulation result is very effective to clarify the air fuel distribution of a PCCI combustion. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | AMER CHEMICAL SOC | - |
dc.title | A study of the characteristics of mixture formation and combustion in a PCCI engine using an early multiple injection strategy | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Lee, Ki-hyung | - |
dc.identifier.doi | 10.1021/ef700568g | - |
dc.identifier.scopusid | 2-s2.0-45449090325 | - |
dc.identifier.wosid | 000256057600019 | - |
dc.identifier.bibliographicCitation | ENERGY & FUELS, v.22, no.3, pp.1542 - 1548 | - |
dc.relation.isPartOf | ENERGY & FUELS | - |
dc.citation.title | ENERGY & FUELS | - |
dc.citation.volume | 22 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 1542 | - |
dc.citation.endPage | 1548 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Energy & Fuels | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Energy & Fuels | - |
dc.relation.journalWebOfScienceCategory | Engineering, Chemical | - |
dc.identifier.url | https://pubs.acs.org/doi/10.1021/ef700568g | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.