Experimental study on the stratified combustion characteristics according to compression ratio and intake temperature in a dig engine
- Authors
- Lee, C. H.; Lee, K. H.
- Issue Date
- Oct-2006
- Publisher
- KOREAN SOC AUTOMOTIVE ENGINEERS
- Keywords
- stratified-charge combustion ignition (SCCI); GDI; mixture distribution; stratified combustion; ROHR (rate of heat release)
- Citation
- INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, v.7, no.6, pp.675 - 680
- Indexed
- SCIE
SCOPUS
KCI
- Journal Title
- INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY
- Volume
- 7
- Number
- 6
- Start Page
- 675
- End Page
- 680
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/44659
- ISSN
- 1229-9138
- Abstract
- In the direct injected gasoline engine, atomized spray is desired to achieve efficient mixture formation needed to good engine performance because the injection process leaves little time for the evaporation of fuels. Therefore, substantial understanding of global spray structure and quantitative characteristics of spray are decisive technology to optimize combustion system of a GDI engine. The combustion and emission characteristics of gasoline-fueled stratified-charge compression ignition (SCCI) engine according to intake temperature and compression ratio was examined. The fuel was injected directly to the cylinder under the high temperature condition resulting from heating the intake port. With this injection strategy, the SCCI combustion region was expanded dramatically without any increase in NOx emissions, which were seen in the case of compression stroke injection. Injection timing during the intake temperature was found to be an important parameter that affects the SCCI region width. The mixture stratification and the fuel reformation can be utilized to reduce the required intake temperature for suitable SCCI combustion under each set of engine speed and compression ratio conditions.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MECHANICAL ENGINEERING > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/44659)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.