Surface modification effect of wettability on the performance of a PDMS-based valveless micropump
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Cho, Woong | - |
dc.contributor.author | Ko, Yong Jun | - |
dc.contributor.author | Ahn, Yoo Min | - |
dc.contributor.author | Yoon, Joon Yong | - |
dc.contributor.author | Cho, N.G. | - |
dc.date.accessioned | 2021-06-23T22:39:35Z | - |
dc.date.available | 2021-06-23T22:39:35Z | - |
dc.date.issued | 2006-12 | - |
dc.identifier.issn | 1013-9826 | - |
dc.identifier.issn | 1662-9795 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/45383 | - |
dc.description.abstract | Experimental investigation and numerical simulation on the effect of surface wettability on the performance of a polydimethylsiloxane (PDMS) based diffuser micropump are presented. A valveless micro membrane pump with piezoelectric actuation has been examined. Using a replica molding technique, the valveless micropump was made of PDMS on a Pyrex glass substrate. A thin piezoelectric (PZT) disc was used as an actuator. Poly vinyl alcohol (PVA) and octadecyltrichlorosilane (OTS) coatings, which make the coated surface hydrophilic and hydrophobic, respectively, were used to modify the surface wettability inside the pump. In our experiments, the contact angle of the PDMS surface changed from 96.6° to 29.1° and 99.6° by PVA and OTS coatings, respectively, and the contact angle of glass changed from 33.2° to 17.5° and 141.8°. A self-priming process was numerically simulated in a diffuser element using a computational fluid dynamics program (CFD-ACE+). The results show that fewer gas bubbles were created in the hydrophilic coated pump than in the hydrophobic coated one as time progressed. This agrees well with experimental observations. Steady-state flow rates of the micropump were measured. Compared to the non-coated pump, the flow rate increased slightly with the hydrophobic coating but decreased with the hydrophilic coating. We determine that surface wettability significantly affects the performance of a PDMS-based micropump. | - |
dc.format.extent | 4 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | Trans Tech Publications Ltd. | - |
dc.title | Surface modification effect of wettability on the performance of a PDMS-based valveless micropump | - |
dc.type | Article | - |
dc.publisher.location | 스위스 | - |
dc.identifier.doi | 10.4028/www.scientific.net/KEM.326-328.297 | - |
dc.identifier.scopusid | 2-s2.0-33751509441 | - |
dc.identifier.wosid | 000243448200073 | - |
dc.identifier.bibliographicCitation | Key Engineering Materials, v.326-328, pp 297 - 300 | - |
dc.citation.title | Key Engineering Materials | - |
dc.citation.volume | 326-328 | - |
dc.citation.startPage | 297 | - |
dc.citation.endPage | 300 | - |
dc.type.docType | Conference Paper | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Biotechnology & Applied Microbiology | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Science & Technology - Other Topics | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Biotechnology & Applied Microbiology | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.relation.journalWebOfScienceCategory | Nanoscience & Nanotechnology | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Ceramics | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Characterization & Testing | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Composites | - |
dc.subject.keywordPlus | Computer simulation | - |
dc.subject.keywordPlus | Hydrophilicity | - |
dc.subject.keywordPlus | Piezoelectric devices | - |
dc.subject.keywordPlus | Polyvinyl alcohols | - |
dc.subject.keywordPlus | Surface phenomena | - |
dc.subject.keywordPlus | Surface treatment | - |
dc.subject.keywordPlus | Wetting | - |
dc.subject.keywordPlus | Hydrophilic/hydrophobic coatings | - |
dc.subject.keywordPlus | Micropumps | - |
dc.subject.keywordPlus | Polydimethylsiloxane (PDMS) | - |
dc.subject.keywordPlus | Surface wettability | - |
dc.subject.keywordPlus | Organic polymers | - |
dc.subject.keywordAuthor | Hydrophilic/hydrophobic coatings | - |
dc.subject.keywordAuthor | PDMS-based diffuser micropump | - |
dc.subject.keywordAuthor | Surface wettability | - |
dc.identifier.url | https://www.scientific.net/KEM.326-328.297 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.