Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

Effect of powder size on the microstructure and magnetic properties of Nd-Fe-B magnet alloy

Full metadata record
DC Field Value Language
dc.contributor.authorCho, Ju-Young-
dc.contributor.authorAbbas, Sardar Farhat-
dc.contributor.authorYong-Ho-Choa-
dc.contributor.authorKim, Taek-Soo-
dc.date.accessioned2021-06-22T11:02:40Z-
dc.date.available2021-06-22T11:02:40Z-
dc.date.created2021-01-21-
dc.date.issued2019-06-
dc.identifier.issn1733-3490-
dc.identifier.urihttps://scholarworks.bwise.kr/erica/handle/2021.sw.erica/4656-
dc.description.abstractRare earth Nd-Fe-B, a widely used magnet composition, was synthesized in a shape of powders using gas atomization, a rapid solidification based process. The microstructure and properties were investigated in accordance with solidification rate and densification. Detailed microstructural characterization was performed by using scanning electron microscope (SEM) and the structural properties were measured by using X-ray diffraction. Iron in the form of alpha-Fe phase was observed in powder of about 30 mu m. It was expected that fraction of Nd2Fe14B phase increased rapidly with decrease in powder size, on the other hand that of alpha-Fe phase was decreased. Nd-rich phase diffused from grain boundary to particle boundary after hot deformation due to capillary action. The coercivity of the alloy decreased with increase in powder size. After hot deformation, Nd2Fe14B phase tend to align to c-axis.-
dc.language영어-
dc.language.isoen-
dc.publisherPolish Academy of Sciences-
dc.titleEffect of powder size on the microstructure and magnetic properties of Nd-Fe-B magnet alloy-
dc.typeArticle-
dc.contributor.affiliatedAuthorYong-Ho-Choa-
dc.identifier.doi10.24425/amm.2019.127589-
dc.identifier.scopusid2-s2.0-85066158943-
dc.identifier.wosid000473163500032-
dc.identifier.bibliographicCitationArchives of Metallurgy and Materials, v.64, no.2, pp.623 - 626-
dc.relation.isPartOfArchives of Metallurgy and Materials-
dc.citation.titleArchives of Metallurgy and Materials-
dc.citation.volume64-
dc.citation.number2-
dc.citation.startPage623-
dc.citation.endPage626-
dc.type.rimsART-
dc.type.docTypeArticle-
dc.description.journalClass1-
dc.description.isOpenAccessY-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.relation.journalResearchAreaMetallurgy & Metallurgical Engineering-
dc.relation.journalWebOfScienceCategoryMetallurgy & Metallurgical Engineering-
dc.subject.keywordPlusDEFORMATION-
dc.subject.keywordPlusSTATE-
dc.subject.keywordAuthorNd-Fe-B-
dc.subject.keywordAuthorGas atomization-
dc.subject.keywordAuthorPowder size-
dc.subject.keywordAuthorCrystal orientation-
dc.subject.keywordAuthorHot deformation-
dc.identifier.urlhttps://journals.pan.pl/dlibra/publication/127589/edition/111329/content-
Files in This Item
Go to Link
Appears in
Collections
COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher CHOA, YONG HO photo

CHOA, YONG HO
ERICA 공학대학 (DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING)
Read more

Altmetrics

Total Views & Downloads

BROWSE