A conductive thin layer on prepared positive electrodes by vapour reaction printing for high-performance lithium-ion batteries
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Ahn, Jinhyeok | - |
dc.contributor.author | Yoon, Sukeun | - |
dc.contributor.author | Jung, Seul Gi | - |
dc.contributor.author | Yim, Jin-Heong | - |
dc.contributor.author | Cho, Kuk Young | - |
dc.date.accessioned | 2021-06-22T13:23:55Z | - |
dc.date.available | 2021-06-22T13:23:55Z | - |
dc.date.created | 2021-01-21 | - |
dc.date.issued | 2017-10 | - |
dc.identifier.issn | 2050-7488 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/8565 | - |
dc.description.abstract | Surfacemodification, especially by thin-layer coating, has provided amajor breakthrough in high-performance lithium-ion batteries (LIBs). Surface coating with conductive materials at the level of single active particles has been used to overcome poor conductivity in electrodes. Nevertheless, the resulting decrease in the volumetric capacity and the complexity of the required manufacturing conditions are problematic for particle-scale coating techniques. Here, we report a facile alternative route to coating conformal thin-layer conducting poly(3,4-ethylenedioxythiophene) (PEDOT) through vapour reaction printing (VRP) on prepared electrodes. A positive electrode based on micron-sized LiFePO4 (LFP) was used to highlight the possible improvements in the intrinsic limitations of poor electrical and ionic conductivity. The effective conformal surface coating of the thin PEDOT layer was confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy. The PEDOT coated LFP electrodes exhibited outstanding improvements not only in cycling stability, showing 96.6% retention of the initial capacity after 100 cycles, but also in their rate capability, achieving 0.668 mA h at a rate of 1C. The uncoated pristine LFP electrode showed only 23.5% of the initial capacity after 100 cycles and 0.181 mA h at a rate of 1C. These remarkable results were attributed to the conformal PEDOT layer, which offers improved conduction pathways and ion diffusion. Therefore, this new method of coating prepared electrodes with a conductive conformal thin layer is promising for the design of electrodes for high-performance lithium-ion batteries. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | ROYAL SOC CHEMISTRY | - |
dc.title | A conductive thin layer on prepared positive electrodes by vapour reaction printing for high-performance lithium-ion batteries | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Cho, Kuk Young | - |
dc.identifier.doi | 10.1039/c7ta05591a | - |
dc.identifier.scopusid | 2-s2.0-85031708423 | - |
dc.identifier.wosid | 000413189100016 | - |
dc.identifier.bibliographicCitation | JOURNAL OF MATERIALS CHEMISTRY A, v.5, no.40, pp.21214 - 21222 | - |
dc.relation.isPartOf | JOURNAL OF MATERIALS CHEMISTRY A | - |
dc.citation.title | JOURNAL OF MATERIALS CHEMISTRY A | - |
dc.citation.volume | 5 | - |
dc.citation.number | 40 | - |
dc.citation.startPage | 21214 | - |
dc.citation.endPage | 21222 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Chemistry | - |
dc.relation.journalResearchArea | Energy & Fuels | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Chemistry, Physical | - |
dc.relation.journalWebOfScienceCategory | Energy & Fuels | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.subject.keywordPlus | LIFEPO4 CATHODE MATERIAL | - |
dc.subject.keywordPlus | CARBON | - |
dc.subject.keywordPlus | BINDER | - |
dc.subject.keywordPlus | ANODE | - |
dc.subject.keywordPlus | SILICON | - |
dc.subject.keywordAuthor | LIFEPO4 CATHODE MATERIAL | - |
dc.subject.keywordAuthor | RATE CAPABILITY | - |
dc.subject.keywordAuthor | CARBON | - |
dc.subject.keywordAuthor | BINDER | - |
dc.subject.keywordAuthor | ANODE | - |
dc.subject.keywordAuthor | POLY(3,4-ETHYLENEDIOXYTHIOPHENE) | - |
dc.subject.keywordAuthor | SILICON | - |
dc.identifier.url | https://pubs.rsc.org/en/content/articlelanding/2017/TA/C7TA05591A | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.