Template-Free Electrochemical Deposition of t-Se Nano- and Sub-micro Structures With Controlled Morphology and Dimensions
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Seyedmahmoudbaraghani, S. | - |
dc.contributor.author | Yu, S. | - |
dc.contributor.author | Lim, J. | - |
dc.contributor.author | Myung, N.V. | - |
dc.date.available | 2020-10-22T08:40:03Z | - |
dc.date.created | 2020-09-24 | - |
dc.date.issued | 2020-08 | - |
dc.identifier.issn | 2296-2646 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/gachon/handle/2020.sw.gachon/78714 | - |
dc.description.abstract | Selenium, depending on its crystal structure, can exhibit various properties and, as a result, be used in a wide range of applications. However, its exploitation has been limited due to the lack of understanding of its complex growth mechanism. In this work, template-free electrodeposition has been utilized for the first time to synthesize hexagonal-selenium (t-Se) microstructures of various morphologies at 80°C. Cyclic voltammetry (CV) and linear sweep voltammetry (LSV) revealed 5 reduction peaks, which were correlated with possible electrochemical or chemical reaction related to the formation of selenium. Potentiostatic electrodeposition using 100 mM SeO2 showed selenium nanorods formed at−0.389 V then increased in diameter up to −0.490 V, while more negative potentials (-0.594 V) induced formation of sub-micron wires with average diameter of 708 ± 116 nm. Submicron tubes of average diameter 744 ± 130 nm were deposited at −0.696 V. Finally, a mixture of tubes, wires, and particles was observed at more cathodic potential due to a combination of nucleation, growth, dissolution of structures as well as formation of amorphous selenium via comproportionation reaction. Texture coefficient as a function of applied potential described the preferred orientation of the sub-microstructures changed from (100) direction to more randomly oriented as more cathodic potentials were applied. Lower selenium precursor concentration lead to formation of nanowires only with smaller average diameters (124 ± 42 nm using 1 mM, 153 ± 46 nm using 10 mM SeO2 at −0.389 V). Time-dependent electrodeposition using 100 mM selenium precursor at −0.696 V explained selenium was formed first as amorphous, on top of which nucleation continued to form rods and wires, followed by preferential dissolution of the wire core to form tubes. © Copyright © 2020 Seyedmahmoudbaraghani, Yu, Lim and Myung. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Frontiers Media S.A. | - |
dc.relation.isPartOf | Frontiers in Chemistry | - |
dc.title | Template-Free Electrochemical Deposition of t-Se Nano- and Sub-micro Structures With Controlled Morphology and Dimensions | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.description.journalClass | 1 | - |
dc.identifier.wosid | 000570674000001 | - |
dc.identifier.doi | 10.3389/fchem.2020.00785 | - |
dc.identifier.bibliographicCitation | Frontiers in Chemistry, v.8 | - |
dc.identifier.scopusid | 2-s2.0-85090926578 | - |
dc.citation.title | Frontiers in Chemistry | - |
dc.citation.volume | 8 | - |
dc.contributor.affiliatedAuthor | Lim, J. | - |
dc.type.docType | Article | - |
dc.subject.keywordAuthor | electrodeposition | - |
dc.subject.keywordAuthor | nanotube | - |
dc.subject.keywordAuthor | nanowire | - |
dc.subject.keywordAuthor | selenium | - |
dc.subject.keywordAuthor | tetragonal | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
1342, Seongnam-daero, Sujeong-gu, Seongnam-si, Gyeonggi-do, Republic of Korea(13120)031-750-5114
COPYRIGHT 2020 Gachon University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.