Thermo-hydraulic characterization and design optimization of delta-shaped obstacles in solar water heating system using CRITIC-COPRAS approach

Abstract

This study reports on the performance of delta-shaped obstacles in a solar water heating system (SWHS) by means of experimental analysis and optimization. The influence of different parameter combinations such as Reynolds number (200, 600, 1000, 1400, 1800), pitch ratio (0.5, 1, 1.5), blockage ratio (0.15, 0.20, 0.25), and angle of attack (45 degrees) on Nusselt number, friction factor and thermo-hydraulic performance of SWHS were analyzed. For the combination of Reynolds number = 1800 and pitch ratio = 0.5, the Nusselt number remained highest for 0.25 of blockage ratio, whereas the friction factor remained lowest for a blockage ratio of 0.15. The maximum thermo-hydraulic efficiency was achieved using Reynolds number = 200, pitch ratio = 0.5, and blockage ratio = 0.20. The obtained results were intensely dependent on parameter combinations without any pronounced trend. Therefore, criteria importance through inter-criteria correlation (CRITIC) and complex proportional assessment (COPRAS) approach was implemented to find optimal design alternative. The results of the hybrid CRITIC-COPRAS approach showed that the combination of Reynolds number = 1800, pitch ratio = 0.5, blockage ratio = 0.20, and angle of attack = 45 degrees is the best alternative for maximum thermal enhancement in SWHS. The sensitivity analysis proved the robustness of the results that the first-ranked alternative is the most dominant in all scenarios.