Facile microfabrication of three dimensional-patterned micromixers using additive manufacturing technologyopen access
- Authors
- Koo, Doheon; So, Hongyun
- Issue Date
- Apr-2022
- Publisher
- NATURE RESEARCH
- Citation
- SCIENTIFIC REPORTS, v.12, no.1, pp.1 - 12
- Indexed
- SCIE
SCOPUS
- Journal Title
- SCIENTIFIC REPORTS
- Volume
- 12
- Number
- 1
- Start Page
- 1
- End Page
- 12
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/138959
- DOI
- 10.1038/s41598-022-10356-z
- ISSN
- 2045-2322
- Abstract
- This study investigates the manufacturing method of oblique patterns in microchannels and the effect of these patterns on mixing performance in microchannels. To fabricate three-dimensional (3D) and oblique patterns in microchannels, 3D printing and replica methods were utilized to mold patterns and microchannels, respectively. The angle and size of the patterns were controlled by the printing angle and resolution, respectively. The mixing efficiency was experimentally characterized, and the mixing principle was analyzed using computational fluid dynamics simulation. The analysis showed that the mixing channel cast from the mold printed with a printing angle of 30 degrees and resolution of 300 mu m exhibited the best mixing efficiency with a segregation index of approximately 0.05 at a Reynolds number of 5.4. This was because, as the patterns inside the microchannel were more oblique, "split" and "recombine" behaviors between two fluids were enhanced owing to the geometrical effect. This study supports the use of the 3D printing method to create unique patterns inside microchannels and improve the mixing performance of two laminar flows for various applications such as point-of-care diagnostics, lab-on-a-chip, and chemical synthesis.
- Files in This Item
-
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/138959)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.