Intense pulsed light sintering of Cu nano particles/micro particles-ink assisted with heating and vacuum holding of substrate for warpage free printed electronic circuit
- Authors
- Ryu, Chung-Hyeon; Joo, Sung-Jun; Kim, Hak-Sung
- Issue Date
- Apr-2019
- Publisher
- ELSEVIER SCIENCE SA
- Keywords
- Printed electronics; Intense pulsed light sintering; Warpage; Substrate vacuum heating; Cu nano/micro particles
- Citation
- THIN SOLID FILMS, v.675, pp.23 - 33
- Indexed
- SCIE
SCOPUS
- Journal Title
- THIN SOLID FILMS
- Volume
- 675
- Start Page
- 23
- End Page
- 33
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/14238
- DOI
- 10.1016/j.tsf.2019.02.020
- ISSN
- 0040-6090
- Abstract
- In this work, intense pulsed light (IPL) sintering process was investigated with vacuum stretching and heating of the polymer substrate for warpage free printed electronics circuit. The IPL irradiation energy and substrate heating temperature were optimized to obtain high electrical conductivity, high adhesion strength, and little warpage of printed Cu electrodes pattern on the polyimide (PI) substrate. Scanning electron microscopy and x-ray diffraction were conducted to characterize microstructure and transformation crystal phase of the IPL sintered Cu nanoparticle (NP)/microparticle (MP)-ink film. The resistivity of IPL sintered Cu NP/MP-ink films was measured using the four-point probe method and profilometer. In order to monitor IPL sintering process, in-situ resistance and temperature monitoring of Cu NP/MP-ink were conducted. Also, a transient heat transfer analysis was performed using finite-element analysis software to predict temperature gradients of Cu NP/MP-ink and polymer substrate during IPL light sintering process. As a result, the optimal IPL light sintered Cu NP/MP-ink film (vacuum applied, 150 degrees C heating, and irradiation energy: 3.5 J/cm(2)) had a low resistivity 6.94 mu Omega.cm and 5 B level of adhesion strength with almost no warpage of PI substrate.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/14238)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.