Joint configuration strategy for serial-chain safe manipulators
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Hong, Seonghun | - |
dc.contributor.author | Lee, Woosub | - |
dc.contributor.author | Cho, Changhyun | - |
dc.contributor.author | Kang, Sungchul | - |
dc.contributor.author | Lee, Hyeong cheol | - |
dc.date.accessioned | 2022-07-07T07:44:06Z | - |
dc.date.available | 2022-07-07T07:44:06Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2014-11 | - |
dc.identifier.issn | 2153-0858 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/143960 | - |
dc.description.abstract | Multi-DoFs (Degrees of Freedom) manipulators with more than 6-DoF can perform complex and diverse tasks. To make these serial-chain manipulators safer, a variety of safety components were researched. If there is a crash at the end-effector of the serial-chain manipulators, components mounted on joints of the upper and lower arm can absorb the impact. Unfortunately, physical human-robot interaction does not occur only at the end-effector, a collision can happen anywhere from the base to the end-effector. If a collision occurs in the upper arm of relatively low DoFs, safety components attached to each joint may not work properly. Therefore, a study for joint configurations of serial manipulators is necessary with respect to the placement of safety components at the shoulder joint. Through various case studies, this paper verifies the appropriate joint configurations that place safety components at each revolute joint for physical human-robot safety. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Institute of Electrical and Electronics Engineers Inc. | - |
dc.title | Joint configuration strategy for serial-chain safe manipulators | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Lee, Hyeong cheol | - |
dc.identifier.doi | 10.1109/IROS.2014.6942854 | - |
dc.identifier.scopusid | 2-s2.0-84911496178 | - |
dc.identifier.bibliographicCitation | IEEE International Conference on Intelligent Robots and Systems, pp.2166 - 2171 | - |
dc.relation.isPartOf | IEEE International Conference on Intelligent Robots and Systems | - |
dc.citation.title | IEEE International Conference on Intelligent Robots and Systems | - |
dc.citation.startPage | 2166 | - |
dc.citation.endPage | 2171 | - |
dc.type.rims | ART | - |
dc.type.docType | Conference Paper | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordPlus | Chains | - |
dc.subject.keywordPlus | Human robot interaction | - |
dc.subject.keywordPlus | Intelligent robots | - |
dc.subject.keywordPlus | Robots | - |
dc.subject.keywordPlus | Joint configuration | - |
dc.subject.keywordPlus | Lower arm | - |
dc.subject.keywordPlus | Physical human-robot interactions | - |
dc.subject.keywordPlus | Revolute joints | - |
dc.subject.keywordPlus | Robot safety | - |
dc.subject.keywordPlus | Safety component | - |
dc.subject.keywordPlus | Serial manipulators | - |
dc.subject.keywordPlus | Shoulder joints | - |
dc.subject.keywordPlus | Manipulators | - |
dc.identifier.url | https://ieeexplore.ieee.org/document/6942854 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.