스트럿-타이 모델 적용을 통한 외부 보-기둥 접합부 전단강도 설계의 필요성Necessity of Design Method with Strut-Tie Models on Shear Strength of Exterior Beam-Column Joints
- Other Titles
- Necessity of Design Method with Strut-Tie Models on Shear Strength of Exterior Beam-Column Joints
- Authors
- 이장재; 최창식
- Issue Date
- May-2018
- Publisher
- 한국콘크리트학회
- Citation
- 한국콘크리트학회 2018년도 봄 학술대회 논문집, v.30, no.1, pp.653 - 654
- Indexed
- OTHER
- Journal Title
- 한국콘크리트학회 2018년도 봄 학술대회 논문집
- Volume
- 30
- Number
- 1
- Start Page
- 653
- End Page
- 654
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/150019
- Abstract
- Joint failures are classified into J, BJ and B failure. The present design criteria underestimates the failure of the beam joint failure, but the reliability of the joint shear strength model is required because the experimental results are different from results using design criteria in other failure modes. Since the late 1990s, shear strength models have been studied for strut-tie models.
접합부의 파괴는 J, BJ, B파괴로 크게 3가지로 나누어진다. 현행 설계기준식은 BJ(Beam Joint failure) 파괴에 대해서는 과소평가하지만 나머지 파괴유형에 대해서는 설계기준식의 예측값이 실험결과와 크게 차이가 나므로 신뢰성이 높은 접합부 전단강도 모델이 필요하다. 이에 대해서 1990년대 후반부터 스트럿-타이 모델을 전단강도 모델이 연구가 되었다.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 건축공학부 > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/150019)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.