경계층 흡입이 S-Duct의 유동 왜곡에 미치는 영향성 연구Effect on Flow Distortion of S-Duct by Boundary Layer Suction
- Other Titles
- Effect on Flow Distortion of S-Duct by Boundary Layer Suction
- Authors
- Baeg, Seungyong; Lee, Jihyeong; Cho, Jinsoo
- Issue Date
- Jan-2019
- Publisher
- KOREAN SOC AERONAUTICAL & SPACE SCIENCES
- Keywords
- Boundary Layer Suction; Flow Distortion; Flow Separation; Pressure Recovery; S-Duct; Sub Duct
- Citation
- JOURNAL OF THE KOREAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, v.47, no.1, pp.17 - 25
- Indexed
- KCI
- Journal Title
- JOURNAL OF THE KOREAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES
- Volume
- 47
- Number
- 1
- Start Page
- 17
- End Page
- 25
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/15142
- DOI
- 10.5139/JKSAS.2019.47.1.17
- ISSN
- 1225-1348
- Abstract
- 항공기의 Intake는 공간적 제약 또는 생존성 확보의 이유로 S형태의 곡률을 갖는 덕트를 가진다. 그러나 덕트의 곡률은 2차유동과 유동박리의 발생을 야기하며 불균일한 압력분포 생성의 원인이 된다. 본 연구에서는 RAE M 2129 S-Duct의 형상에 보조 Duct를 적용하여 경계층 흡입을 수행하였다. 경계층 흡입의 위치와 각도를 설계변수로 설정하였으며, 흡입면에서 동일 유량을 흡입하는 조건을 부여하였다. S-Duct의 전산해석 타당성을 검증하기 위하여 Port Side와 Starboard Side의 무차원 압력 분포를 ARA 실험값, 전산해석 값과 각각 비교하여 확인하였다. 본 연구에서는 유동 왜곡을 판단하는 공기역학적 성능인자로 유동 왜곡 계수를 사용 하였으며, 경계층 흡입에 의한 유동박리, 와류, 유량 분포 및 압력 분포를 비교 분석 하였다. 그 결과 경계층 흡입 적용 이전과 비교하여 최대 26.14%의 유동 왜곡계수 저감 효과를 확인하였다.
An intake of Aircraft becomes S-shaped geometry due to spatial limitation or procuring survivability. But curvature of the S-shaped geometry makes secondary flow or flow separation which is the cause of non-uniform pressure distribution. In this study, boundary layer suction is applied to RAE M 2129 S-Duct by attaching sub duct. Design variable is suction location and angle. A mass flow rate drawn out by suction at the sub duct outlet is constant over every model. A grid dependency test was conducted to verify validity of computation. The comparison among the CFD ( Computation Fluid Dynamics), ARA experimental result, and ARA computation result of non-dimensional pressure distribution on the Port side and Starboard Side confirmed the validity of CFD. In this study, Distortion Coefficient was used for evaluating aerodynamic performance of S-Duct. The analysis, which was about flow separation, vortex, mass flow rate distribution, and pressure distribution were also investigated. Maximum 26.14% reduction in Distortion Coefficient was verified.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.