Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

High-Speed BLDC Motor Design for Suction Fan and Impact on the Loss caused by Core Welding

Full metadata record
DC Field Value Language
dc.contributor.authorHong, Hyun-Seok-
dc.contributor.authorKim, In-Gun-
dc.contributor.authorLee, Ho-Joon-
dc.contributor.authorGo, Sung-Chul-
dc.contributor.authorLee, Ju-
dc.date.accessioned2022-07-14T20:37:27Z-
dc.date.available2022-07-14T20:37:27Z-
dc.date.created2021-05-12-
dc.date.issued2017-01-
dc.identifier.issn1975-0102-
dc.identifier.urihttps://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/153063-
dc.description.abstractThis paper deals with the effects of welding, which is done to fix the stator stack, on a motor in case of fabricating a prototype motor that is manufactured in a small quantity. In the case of a small motor, the stator is designed and fabricated with the segmented core as a way to raise the fill factor of winding wire to the utmost within a limited size. In case of fabrication by welding both inside and outside of the stator in order to fix the segmented-core stator, the effects of stack are ignored, and the eddy current loss occurs. This paper performed the no-load test on an IPM-type BLDC motor for driving the suction fan of a vacuum cleaner, which was manufactured by using a segmented-core stator. As a result of the test, it was found that input power more than expected was supplied. To analyze the effects of welding by using the finite element analysis method and verify them experimentally, a stator was re-manufactured by bonding, and input power supplied during the no-load test was compared.-
dc.language영어-
dc.language.isoen-
dc.publisherKOREAN INST ELECTR ENG-
dc.titleHigh-Speed BLDC Motor Design for Suction Fan and Impact on the Loss caused by Core Welding-
dc.typeArticle-
dc.contributor.affiliatedAuthorLee, Ju-
dc.identifier.doi10.5370/JEET.2017.12.1.126-
dc.identifier.scopusid2-s2.0-85005977686-
dc.identifier.wosid000391038700015-
dc.identifier.bibliographicCitationJOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY, v.12, no.1, pp.126 - 133-
dc.relation.isPartOfJOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY-
dc.citation.titleJOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY-
dc.citation.volume12-
dc.citation.number1-
dc.citation.startPage126-
dc.citation.endPage133-
dc.type.rimsART-
dc.type.docTypeArticle-
dc.identifier.kciidART002176053-
dc.description.journalClass1-
dc.description.isOpenAccessN-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.description.journalRegisteredClasskci-
dc.relation.journalResearchAreaEngineering-
dc.relation.journalWebOfScienceCategoryEngineering, Electrical & Electronic-
dc.subject.keywordPlusIRON LOSSES-
dc.subject.keywordPlusSTATOR-
dc.subject.keywordAuthorBLDC motor-
dc.subject.keywordAuthorSuction fan-
dc.subject.keywordAuthorCore welding-
dc.subject.keywordAuthorLoss-
dc.identifier.urlhttp://koreascience.or.kr/article/JAKO201709641401421.pdf-
Files in This Item
Go to Link
Appears in
Collections
서울 공과대학 > 서울 전기공학전공 > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher Lee, Ju photo

Lee, Ju
COLLEGE OF ENGINEERING (MAJOR IN ELECTRICAL ENGINEERING)
Read more

Altmetrics

Total Views & Downloads

BROWSE