Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

인체부착형 Headset MIMO 안테나 설계Design of Headset MIMO Antenna for On-Body Application

Other Titles
Design of Headset MIMO Antenna for On-Body Application
Authors
김성진김동호권결최재훈
Issue Date
Dec-2011
Publisher
한국전자파학회
Keywords
MIMO; PIFA; Isolation; WBAN; Headset
Citation
한국전자파학회 논문지, v.22, no.12, pp 1107 - 1115
Pages
9
Indexed
KCI
Journal Title
한국전자파학회 논문지
Volume
22
Number
12
Start Page
1107
End Page
1115
URI
https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/166808
DOI
10.5515/KJKIEES.2011.22.12.1107
ISSN
1226-3133
Abstract
본 논문에서는 인체부착형 Headset MIMO(Multiple-Input Multiple-Output) 안테나를 제안하고, 인체의 영향을 고려한 안테나 성능과 인체에 미칠 수 있는 영향에 대한 분석을 하였다. 제안된 MIMO 안테나는 접지면 위에 PIFA(planar inverted-F antenna) 형태의 두 안테나와 격리도 특성 개선을 위하여 안테나 사이에 위치한 isolator로 구성되어 있다. 근거리장에 인체가 존재할 때 안테나에 미치는 영향을 분석하기 위하여 시뮬레이션을 수행하고, 팬텀을 이용하여 시뮬레이션과 측정을 하였다. 측정 결과, MIMO 안테나의 성능을 평가하는 파라미터 중 하나인 상관 계수(Envelope Correlation Coefficient: ECC)는 ISM 대역에서 0.1 이하의 값을 가지므로 제안된 MIMO 안테나의 diversity 성능이 우수함을 입증하였다. 또한, 측정된 SAR(Specific Absorption Rate) 값은 공급전력 250 mW에서 안테나 1, 2 각각 0.575, 0.571 W/kg이었다. 이는 1 g 평균 전자파 흡수율을 1.6 W/kg으로 제한한 FCC의 지침을 초과하지 않음을 알 수 있다. 따라서 제안된 인체부착형 Headset MIMO 안테나는 실용이 가능할 것으로 기대된다.
In this paper, a headset multiple-input multiple-output(MIMO) antenna for on-body application is proposed and the antenna performance with body effect and the impact on human body are investigated. The proposed MIMO antenna is composed of two planar inverted-F antennas(PIFA) above ground plane and an isolator located between the two antennas enhance the isolation characteristic. Simulation was carried to analyze the effect of human body on antenna performance when a human body is located in the near field of the antenna. According to the measurement result, the diversity performance of the proposed antenna can be considered good since ECC(Envelope Correlation Coefficient), which commonly indicates the performance of a MIMO antenna, remains below 0.1 over the ISM band. The measured SAR values for antennas 1 and 2 are 0.575 W/kg and 0.571 W/kg, respectively when 250 mW input power in engaged. These values satisfy the FCC guideline which states that the 1-g average SAR should be lower than 1.6 W/kg.
Files in This Item
Go to Link
Appears in
Collections
서울 공과대학 > 서울 융합전자공학부 > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetrics

Total Views & Downloads

BROWSE