Rapidly solidified Ti-Si alloys/carbon composites as anode for Li-ion batteries
- Authors
- Lee, Yoo-Sung; Lee, Jong-Hyuk; Kim, Yeon-Wook; Sun, Yang-Kook; Lee, Sung-Man
- Issue Date
- Dec-2006
- Publisher
- Pergamon Press Ltd.
- Keywords
- rapid solidification; Ti-Si alloys; lithium-ion battery; anodes
- Citation
- Electrochimica Acta, v.52, no.4, pp 1523 - 1526
- Pages
- 4
- Indexed
- SCIE
SCOPUS
- Journal Title
- Electrochimica Acta
- Volume
- 52
- Number
- 4
- Start Page
- 1523
- End Page
- 1526
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/180708
- DOI
- 10.1016/j.electacta.2006.02.052
- ISSN
- 0013-4686
1873-3859
- Abstract
- Ti-Si alloys with the nominal composition of Ti14S86, Ti16Si84, Ti21Si79 were rapidly solidified using a single roller melt spinning technique. The melt-spun Ti-Si ribbon powders were mechanically milled with graphite powders, followed by the carbon coating through pyrolysis of coal tar pitch at 900 degrees C under argon flow. These composite electrodes exhibit good cycle performance, especially when the Si content in the Ti-Si alloy is below the composition of the Si+TiSi2 eutectic.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 에너지공학과 > 1. Journal Articles

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.