The high-speed operation of single phase switched reluctance motor considering magnetic saturation
- Authors
- Ahn, Joonseon; Won, Sung Hong; Lee, Ju
- Issue Date
- Apr-2006
- Citation
- Journal of Applied Physics, v.99, no.8
- Indexed
- SCOPUS
- Journal Title
- Journal of Applied Physics
- Volume
- 99
- Number
- 8
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/181572
- DOI
- 10.1063/1.2167354
- ISSN
- 0021-8979
- Abstract
- In the high-speed operation of SRM, the conventional pulse width modulation (PWM) drive method is not available because of the limitation of switching speed; therefore the single-pulse drive method is commonly employed. On the contrary, the use of the single-pulse drive method cannot avoid the overcurrent in the low-speed operation because of the insufficient back emf and the difficulty of duty control. With these reasons, the switching method is commonly changed from PWM at the low-speed operation to the single-pulse method at the high-speed operation. In the fan application, the required load torque increases as a square of the fan speed; it requires more current for the torque generation. Therefore at the mode transition between PWM and single-pulse drive, it is unavoidable that the phase current rapidly increases if the nonlinearity of inductance to the current is not considered. In this paper, by using finite element method (FEM) which is considered with the nonlinearity of the inductance with respect to the current, the speed of mode transition is calculated (18 000 rpm) and verified by the experiment
- Files in This Item
-
- Appears in
Collections - 서울 공과대학 > 서울 전기공학전공 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.