Metal injection molding of W-Cu powders prepared by low energy ball milling
- Authors
- Kim, Soon-Wook; Suk, Myung-Jin; Kim, Young Do
- Issue Date
- Feb-2006
- Publisher
- KOREAN INST METALS MATERIALS
- Keywords
- metal injection molding; W-Cu; low energy ball milling; powder characteristics
- Citation
- METALS AND MATERIALS INTERNATIONAL, v.12, no.1, pp.39 - 44
- Indexed
- SCIE
SCOPUS
KCI
- Journal Title
- METALS AND MATERIALS INTERNATIONAL
- Volume
- 12
- Number
- 1
- Start Page
- 39
- End Page
- 44
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/181783
- DOI
- 10.1007/BF03027521
- ISSN
- 1598-9623
- Abstract
- Low energy ball milled W/Cu powders were used for metal injection molding (MIM) in order to overcome the low powder volume fraction of MIM pails after debinding as well as the inherently poor sinterability of the W-Cu powder compacts. Ball milling was carried out Using commercial fine W and Cu powders to form a powder mixture suitable for injection molding. W powders showed no change in either size or shape during the milling process, but the ductile Cu powders were easily deformed to a three-dimensional equiaxed shape, having a particle size comparable to that of W powders. This modification of powder characteristics by ball milling resulted in all improvement of the solid loading of roughly 58 %, maintaining a high and Uniform powder packing density in the feedstock. The densification behavior of W-Cu MIM pails is also discussed on the basis of the relationship between Cu composition and W particle size.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 신소재공학부 > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/181783)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.