Numerical Analysis of a TEG and mPCM Enhancement System for BIPVs Using CFD
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kang, Yong-Kwon | - |
dc.contributor.author | Joung, Jaewon | - |
dc.contributor.author | Kim, Minseong | - |
dc.contributor.author | Lee, Hyun-Hwa | - |
dc.contributor.author | Jeong, Jae-Weon | - |
dc.date.accessioned | 2023-01-25T09:11:47Z | - |
dc.date.available | 2023-01-25T09:11:47Z | - |
dc.date.created | 2023-01-05 | - |
dc.date.issued | 2022-12 | - |
dc.identifier.issn | 2071-1050 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/182137 | - |
dc.description.abstract | Building-integrated photovoltaics (BIPVs) are the most promising systems for net-zero energy buildings. However, there are few practical cases because of shortcomings, such as the lack of solar tracking and the rapid rise in PV surface temperature. Therefore, methods of increasing the efficiency of BIPVs have been proposed and studied. These include using phase change material (PCM) or heat fins, wavelength selection, decreasing the PV surface temperature, or using a thermoelectric generator (TEG) and convection cooling to utilize the waste heat from the PV. Many preceding studies have been conducted on TEG and convection heat dissipation methods to utilize as much waste heat as possible. Therefore, in this study, a TEG-PCM hybrid system using mPCM was proposed to improve constructability. Herein, the appropriate phase change temperature of the PCM, the heat fin spacing in the PCM container, and the TEG arrangement were analyzed through computational fluid dynamics (CFD)-based simulations. The appropriate melting temperature of the PCM, the heat fin interval, and the arrangement of the TEG for the proposed system are 25 degrees C, 20 mm, and 140 mm, respectively. In order to achieve optimal efficiency, it is necessary to consider an appropriate amount of heat transfer, and it has been confirmed that if there are too many thermoelectric elements, the opposite effect occurs. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | MDPI | - |
dc.title | Numerical Analysis of a TEG and mPCM Enhancement System for BIPVs Using CFD | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Jeong, Jae-Weon | - |
dc.identifier.doi | 10.3390/su142315559 | - |
dc.identifier.scopusid | 2-s2.0-85143778967 | - |
dc.identifier.wosid | 000896254200001 | - |
dc.identifier.bibliographicCitation | SUSTAINABILITY, v.14, no.23, pp.1 - 17 | - |
dc.relation.isPartOf | SUSTAINABILITY | - |
dc.citation.title | SUSTAINABILITY | - |
dc.citation.volume | 14 | - |
dc.citation.number | 23 | - |
dc.citation.startPage | 1 | - |
dc.citation.endPage | 17 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | Y | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | ssci | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Science & Technology - Other Topics | - |
dc.relation.journalResearchArea | Environmental Sciences & Ecology | - |
dc.relation.journalWebOfScienceCategory | Green & Sustainable Science & Technology | - |
dc.relation.journalWebOfScienceCategory | Environmental Sciences | - |
dc.relation.journalWebOfScienceCategory | Environmental Studies | - |
dc.subject.keywordPlus | PHASE-CHANGE MATERIAL | - |
dc.subject.keywordPlus | PHOTOVOLTAIC SYSTEM | - |
dc.subject.keywordPlus | PCM | - |
dc.subject.keywordPlus | PERFORMANCE | - |
dc.subject.keywordPlus | OPTIMIZATION | - |
dc.subject.keywordPlus | SIMULATION | - |
dc.subject.keywordPlus | STORAGE | - |
dc.subject.keywordPlus | DESIGN | - |
dc.subject.keywordPlus | PANEL | - |
dc.subject.keywordAuthor | building-integrated photovoltaic | - |
dc.subject.keywordAuthor | energy harvesting | - |
dc.subject.keywordAuthor | thermoelectric generator | - |
dc.identifier.url | https://www.mdpi.com/2071-1050/14/23/15559 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.