Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
저온 알루미늄 브레이징용 Al-Cu-Si-Sn 합금 설계 및 분말 제조Alloy Design and Powder Manufacturing of Al-Cu-Si alloy for Low-Temperature Aluminum Brazing
- Other Titles
- Alloy Design and Powder Manufacturing of Al-Cu-Si alloy for Low-Temperature Aluminum Brazing
- Issue Date
- Aug-2023
- Publisher
- 한국분말재료학회
- Keywords
- Aluminum alloy; Brazing; Filler metal; Milling
- Citation
- Journal of Powder Materials, v.30, no.4, pp 339 - 345
- Pages
- 7
- Indexed
- KCI
- Journal Title
- Journal of Powder Materials
- Volume
- 30
- Number
- 4
- Start Page
- 339
- End Page
- 345
- ISSN
- 2799-8525
2799-8681
- Abstract
- This study investigates the melting point and brazing properties of the aluminum (Al)-copper (Cu)-silicon (Si)-tin (Sn) alloy fabricated for low-temperature brazing based on the alloy design. Specifically, the Al-20Cu-10Si-Sn alloy is examined and confirmed to possess a melting point of approximately 520oC. Analysis of the melting point of the alloy based on composition reveals that the melting temperature tends to decrease with increasing Cu and Si content, along with a corresponding decrease as the Sn content rises. This study verifies that the Al-20Cu-10Si-5Sn alloy exhibits high liquidity and favorable mechanical properties for brazing through the joint gap filling test and Vickers hardness measurements. Additionally, a powder fabricated using the Al-20Cu-10Si-5Sn alloy demonstrates a melting point of around 515oC following melting point analysis. Consequently, it is deemed highly suitable for use as a low-temperature Al brazing material.
- Files in This Item
- Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 신소재공학부 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.