Sintering behavior and phase transformation of YSZ-LZ composite coatings

Abstract

Sintering behavior and phase transformations in yttria-stabilized zirconia (YSZ)-based thermal barrier coatings (TBCs) control their applications in gas turbines operated at high working temperatures required for improved fuel efficiency. In this work, to control the sintering behavior and reduce phase transformations in YSZ-based TBCs, lanthanum zirconate (LZ) powder was blended with the YSZ feedstock powder, and YSZ-LZ composite coatings were fabricated using the air plasma spraying method. The influence of mixture weight ratio of YSZ to LZ (75:25, 50:50, and 25:75) on the sintering behavior and phase stability of the composite coatings was investigated through the isothermal exposure test at 1100, 1300, and 1400 °C. The as-coated composites showed the pyrochlore and tetragonal phases, indicating that the phases are LZ and YSZ, respectively. As the exposure temperature was increased, the phase transformation of YSZ from the tetragonal phase to the monoclinic phase was accelerated. The content of monoclinic phase was changed with the increasing LZ content after thermal exposure at 1300 and 1400 °C. In addition, the composites showed different sintering and bridging behaviors at the adjacent splats with the LZ content. The composites prepared with the blended feedstock powders of LZ and YSZ produced an obvious effect on the phase stability and mechanical properties.