Effects of wall impingement conditions on spray atomization and wall-wetting for a direct injection spark ignition (DISI) system
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Park, J. | - |
dc.contributor.author | Kim, D. | - |
dc.contributor.author | Park, S. | - |
dc.date.accessioned | 2021-07-30T04:54:54Z | - |
dc.date.available | 2021-07-30T04:54:54Z | - |
dc.date.created | 2021-05-11 | - |
dc.date.issued | 2020 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/2098 | - |
dc.description.abstract | This study was performed to investigate the effects of injection pressure on spray development characteristics wall impingement on the top of piston for various engine operating conditions. Spray visualizations were conducted using a high-speed camera under mid-load and high-load conditions. In the present study, fuel spray impingement on the top of piston was calculated based on the spray images and piston location. Results show that the wall impingement of the injected fuel occurs at the late injection timing at the end of the compression stroke and early injection timing at the beginning of the intake stroke. To prevent the wall impingement, the injection timing should be advanced as the engine speed increases. There is no significant difference in the zero-impingement injection timing region where the wall impingement does not occur even when the engine speed changes. The method proposed in this study can be used to predict the amount of wall impingement of the fuel spray on various cylinder design parameters and engine operating conditions. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Institute for Liquid Atomization and Spray Systems | - |
dc.title | Effects of wall impingement conditions on spray atomization and wall-wetting for a direct injection spark ignition (DISI) system | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Park, S. | - |
dc.identifier.scopusid | 2-s2.0-85090335777 | - |
dc.identifier.bibliographicCitation | ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems | - |
dc.relation.isPartOf | ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems | - |
dc.citation.title | ICLASS 2018 - 14th International Conference on Liquid Atomization and Spray Systems | - |
dc.type.rims | ART | - |
dc.type.docType | Conference Paper | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scopus | - |
dc.subject.keywordPlus | Atomization | - |
dc.subject.keywordPlus | Engines | - |
dc.subject.keywordPlus | Fuels | - |
dc.subject.keywordPlus | High speed cameras | - |
dc.subject.keywordPlus | Pistons | - |
dc.subject.keywordPlus | Speed | - |
dc.subject.keywordPlus | Compression stroke | - |
dc.subject.keywordPlus | Design parameters | - |
dc.subject.keywordPlus | Direct-injection spark ignitions | - |
dc.subject.keywordPlus | Engine operating conditions | - |
dc.subject.keywordPlus | Injection pressures | - |
dc.subject.keywordPlus | Spray atomization | - |
dc.subject.keywordPlus | Spray development | - |
dc.subject.keywordPlus | Wall impingement | - |
dc.subject.keywordPlus | Direct injection | - |
dc.subject.keywordAuthor | Direct injection spark ignition engine | - |
dc.subject.keywordAuthor | Gasoline spray | - |
dc.subject.keywordAuthor | Spray wall impingement | - |
dc.identifier.url | https://hanyang.elsevierpure.com/en/publications/effects-of-wall-impingement-conditions-on-spray-atomization-and-w | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.