Hot corrosion behaviour of nickel-cobalt-based alloys in a lithium molten salt
- Authors
- Cho, Soo Haeng; Kwon, Suk Cheol; Kim, Dae Young; Choi, Woo Seok; Kim, Yong Soo; Lee, Jong Hyeon
- Issue Date
- May-2019
- Publisher
- Pergamon Press Ltd.
- Keywords
- Hot corrosion; Ni,Co-based alloy; Lithium molten salt; Electrolytic reduction; Structural material
- Citation
- Corrosion Science, v.151, pp 20 - 26
- Pages
- 7
- Indexed
- SCI
SCIE
SCOPUS
- Journal Title
- Corrosion Science
- Volume
- 151
- Start Page
- 20
- End Page
- 26
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/2206
- DOI
- 10.1016/j.corsci.2019.01.041
- ISSN
- 0010-938X
1879-0496
- Abstract
- In this study, hot corrosion behaviours of Haynes 282 (H282), Nimonic 90 (N90), and Haynes HR160 (HR160) in LiCI-Li2O molten salt were investigated at 650 degrees C under argon atmosphere. The corrosion rate was in the order of H282 < N90 < HR160, depending on the morphology and structure of the scale. H282 showed a localised corrosion behaviour, while N90 showed a uniform corrosion behaviour. For HR-160, intergranular corrosion was observed. The high Cr content caused intergranular corrosion in the corrosion layer. Thus, excess Cr has a deleterious effect on the corrosion kinetics during hot corrosion in LiCI-Li2O molten salt.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 원자력공학과 > 1. Journal Articles

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.