A Wearable Metamaterial Microwave Absorber
- Authors
- Tak, Jinpil; Choi, Jaehoon
- Issue Date
- Aug-2016
- Publisher
- IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
- Keywords
- Frequency selective surface (FSS); metamaterial (MTM); microwave absorber; textile absorber; wearable absorber
- Citation
- IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, v.16, pp.784 - 787
- Indexed
- SCIE
SCOPUS
- Journal Title
- IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS
- Volume
- 16
- Start Page
- 784
- End Page
- 787
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/22267
- DOI
- 10.1109/LAWP.2016.2604257
- ISSN
- 1536-1225
- Abstract
- A wearable metamaterial microwave absorber (WMMA) for indoor radar clear applications is proposed. The proposed WMMA is composed of two square ring resonators with different sizes, a backing ground plane, and a felt substrate with a 1-mm thickness. All conductive materials were fabricated using conductive textiles. The grid array of different square ring resonators provides a broad absorption band due to two neighboring resonance peaks. The measured results exhibit two absorptivity peaks greater than 90% and a full-width at half-maximum of 18.9% at 9.475 GHz. Also, the proposed WMMA has a high absorptivity regardless of the polarization angle of the electromagnetic waves and the deformation effect.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - 서울 공과대학 > 서울 융합전자공학부 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.