디젤 및 DME 연료의 거시적 분무특성 비교
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박준규 | - |
dc.contributor.author | 전문수 | - |
dc.contributor.author | 박성욱 | - |
dc.date.accessioned | 2021-08-02T19:26:19Z | - |
dc.date.available | 2021-08-02T19:26:19Z | - |
dc.date.created | 2021-05-13 | - |
dc.date.issued | 2012-12 | - |
dc.identifier.issn | 1226-2277 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/27415 | - |
dc.description.abstract | This study focused on comparing macroscopic characteristics of DME and diesel fuel experimentally. DME fuel is one of the most promising alternative fuels because of its superiority in atomization characteristic and clearness in terms of exhaust gas compared with existing fossil fuels. In addition, DME fuel has high cetane number so it could be applied to compression ignition engine. However because DME fuel exists in gas phase at room temperature and atmospheric pressure, and it corrodes rubber parts of fuel line, DME fuel is hard to apply to commercial vehicles. To establish knowledge about DME fuel and furthermore, to develop commercial DME vehicles such as passenger cars, many research have been proceeded steadily. The present study, by comparing spray characteristics of DME fuel to those of diesel fuel, improved atomization characteristics in DME were revealed. Injection quantity measurement and spray visualization experiment were progressed and it was revealed that DME fuel shows small injection quantity than that of diesel fuel and axial development of spray in terms of spray tip penetration decreases when DME fuel was injected. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국분무공학회 | - |
dc.title | 디젤 및 DME 연료의 거시적 분무특성 비교 | - |
dc.title.alternative | Comparisons of Diesel and DME Fuel in Macroscopic Spray Characteristics | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 박성욱 | - |
dc.identifier.doi | 10.15435/JILASSKR.2012.17.4.205 | - |
dc.identifier.bibliographicCitation | 한국분무공학회지, v.17, no.4, pp.205 - 209 | - |
dc.relation.isPartOf | 한국분무공학회지 | - |
dc.citation.title | 한국분무공학회지 | - |
dc.citation.volume | 17 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 205 | - |
dc.citation.endPage | 209 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001725302 | - |
dc.description.journalClass | 2 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | 디메틸에테르 | - |
dc.subject.keywordAuthor | 분무 가시화 | - |
dc.subject.keywordAuthor | 분사량 | - |
dc.subject.keywordAuthor | 분무도달거리 | - |
dc.subject.keywordAuthor | Dimethyl ether | - |
dc.subject.keywordAuthor | Spray visualization | - |
dc.subject.keywordAuthor | Injection quantity | - |
dc.subject.keywordAuthor | Spray tip penetration | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.