AnyClimb: a new wall-climbing robotic platform on various curvatures
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Liu, Yanheng | - |
dc.contributor.author | Kim, HyunGyu | - |
dc.contributor.author | Seo, TaeWon | - |
dc.date.accessioned | 2021-07-30T05:04:53Z | - |
dc.date.available | 2021-07-30T05:04:53Z | - |
dc.date.created | 2021-05-14 | - |
dc.date.issued | 2016-08 | - |
dc.identifier.issn | 1083-4435 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/2804 | - |
dc.description.abstract | Climbing robots are being developed to clean, paint, or inspect high areas that are hard to reach for human beings. To widen their application area, robotic platforms have been suggested using bio-inspired attachment methods, such as dry and wet adhesion for smooth and rough surfaces. Generally, robots can climb either walls or poles, but there has been no single robotic platform that can climb both. We developed a new robotic platform to vertically climb a surface with various curvatures in the horizontal direction. Flat dry adhesive was used to make eight footpads. Walking locomotion of the footpads was achieved by a four-bar mechanism with a single motor. To adapt to curved walls, a compliant mechanism is suggested with an asymmetric four-bar mechanism. The kinematics and compliance design parameters were determined by analysis, and experiments were performed on walls with different curvatures. We plan to apply the platform to clean the surfaces of solar panels with different curvatures after modifying the design for commercialization. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC | - |
dc.title | AnyClimb: a new wall-climbing robotic platform on various curvatures | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Seo, TaeWon | - |
dc.identifier.doi | 10.1109/TMECH.2016.2529664 | - |
dc.identifier.scopusid | 2-s2.0-84978689293 | - |
dc.identifier.wosid | 000380028200002 | - |
dc.identifier.bibliographicCitation | IEEE-ASME TRANSACTIONS ON MECHATRONICS, v.21, no.4, pp.1812 - 1821 | - |
dc.relation.isPartOf | IEEE-ASME TRANSACTIONS ON MECHATRONICS | - |
dc.citation.title | IEEE-ASME TRANSACTIONS ON MECHATRONICS | - |
dc.citation.volume | 21 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 1812 | - |
dc.citation.endPage | 1821 | - |
dc.type.rims | ART | - |
dc.type.docType | 정기학술지(Article(Perspective Article포함)) | - |
dc.description.journalClass | 1 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Automation & Control Systems | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalWebOfScienceCategory | Automation & Control Systems | - |
dc.relation.journalWebOfScienceCategory | Engineering, Manufacturing | - |
dc.relation.journalWebOfScienceCategory | Engineering, Electrical & Electronic | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.subject.keywordPlus | ADHESION | - |
dc.subject.keywordPlus | DESIGN | - |
dc.subject.keywordAuthor | Compliant mechanism | - |
dc.subject.keywordAuthor | curvature | - |
dc.subject.keywordAuthor | dry adhesion | - |
dc.subject.keywordAuthor | four-bar mechanism | - |
dc.subject.keywordAuthor | wall-climbing robot (WCR) | - |
dc.identifier.url | https://ieeexplore.ieee.org/document/7406749 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
222, Wangsimni-ro, Seongdong-gu, Seoul, 04763, Korea+82-2-2220-1365
COPYRIGHT © 2021 HANYANG UNIVERSITY.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.