실린더 내벽의 버니싱 공정에 대한 유한요소해석Finite Element Analysis of a Burnishing Process for the Inner Surface of a Cylinder
- Other Titles
- Finite Element Analysis of a Burnishing Process for the Inner Surface of a Cylinder
- Authors
- 박종진
- Issue Date
- 2010
- Publisher
- 한국소성가공학회
- Keywords
- Burnishing; Cylinder; Surface Roughness; Hardness; Residual Stress
- Citation
- 소성가공, v.19, no.6, pp.372 - 377
- Journal Title
- 소성가공
- Volume
- 19
- Number
- 6
- Start Page
- 372
- End Page
- 377
- URI
- https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/21131
- ISSN
- 1225-696X
- Abstract
- Elasto-plastic finite element analysis was performed for a burnishing process for the inner surface of a cylinder by mandrel. Three different configurations in roughness of the inner surface, two different thicknesses of the cylinder wall,and five different diameters of the mandrel were selected for the present investigation. Although the surface roughness was improved with the increase of the mandrel diameter, defects of folding occurred as the mandrel diameter exceeded certain limits. Improvements in the surface roughness, distributions of effective strain, effective stress and residual circumferential stress, and the variation of mandrel force were also investigated.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of General Studies > Department of General Studies > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/21131)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.